About this firmware update

This service provides the software for upgrading the COOLPIX L110 firmware to v1.4.

The following improvements have been made in version 1.4.

-   An issue that sometimes caused pictures taken under incandescent coloured fluorescent lighting with White balance set to Auto to have a yellowish cast has been resolved.

How to confirm your cameras current firmware version

If the latest firmware version is already installed on your L110, you need not proceed with download or installation of this Firmware Upgrade. The current firmware version can be verified from the Firmware version item in the camera's setup menu.

1. Turn on the camera.
2. Press the MENU button to display the menu screen.  
3. Select the Setup Menu.  
4. Select Firmware version from the setup menu.
5. The camera's firmware version will be displayed.  
6. Turn off the camera.

Quick guide for download and installing this firmware update
Please note that when firmware is updated on the camera any images stored on the internal memory are erased.  Please ensure that any images on the camera are copied to a computer or memory card before proceding with this update.

Power the camera from AC adapter unit or use a fully charged battery.

1. Click the link at the bottom of this page to download the .DMG file which contains the firmware.
2. Double-click the .DMG file to display a folder which contains a folder called 'firmware'.
3. Use a card reader or similar device to copy the 'firmware' folder to a formatted SD memory card.    
4. Insert the memory card containing the 'firmware' folder into the camera and turn on the camera.
5. Select Firmware version from the camera's setup menu and follow instructions displayed to upgrade the firmware.    
6. After the upgrade is complete, turn the camera off and remove the memory card.
7. Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded. 

For detailed instructions on how to install this firmware update click here.