COOLPIX L120 Donanım Yazılımı

This service provides software for upgrading the COOLPIX L120 firmware to v1.1. Verify your camera’s firmware version using the instructions below. If this latest version is already installed in your camera, you need not update the firmware.

Be sure that you have read and understand the terms of the license agreement before initiating download of this software from the links at the bottom of this page.

Modifications enabled in this version

• When attempting to format the following SD memory cards with the camera, sometimes the “Card is not formatted. Format card?” message was displayed, and when “Yes” was selected, the same message was displayed again, preventing use of the SD memory card. This issue has been resolved.
  -     SanDisk Extreme Pro SDHC UHS-I (32 GB, 16 GB, 8 GB)
  -     SanDisk Extreme SDHC UHS-I (32 GB, 16 GB, 8 GB, 4 GB)

How to verify your cameras current firmware version

If the latest firmware version is already installed on your L120, you need not proceed with download or installation of this Firmware Upgrade. The current firmware version can be verified from the Firmware version item in the camera's setup menu.

1. Turn on the camera.
2. Press the MENU button to display the menu screen.  
3. Select the Setup Menu.  
4. Select Firmware version from the setup menu.
5. The camera's firmware version will be displayed.  
6. Turn off the camera.

Quick Install Guide

This is the quick install guide, for detailed instructions click the link below.

Power the camera from AC adapter unit or use a fully charged battery.

1. Create a new folder with an appropriate name on your computer's hard drive.

2. Download the Windows (.EXE) or Mac (.DMG) file from the links at the bottom of this page to the folder created in step 1.
3. Run the downloaded file to create a folder called L120Update which contains the firmware folder.
4. Use a card reader or similar device to copy the firmware folder to the root directory of a formatted SD memory card.   
5. Insert the memory card into the camera's memory card slot and turn on the camera.
6. Select Firmware version from the camera's setup menu and follow instructions displayed to upgrade the firmware.
7. After the upgrade is complete, turn the camera off and remove the memory card.
8. Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded.

System Requirements