Română

Deși dispozitivul dumneavoastră nu acceptă acest serviciu de descărcare, el poate fi utilizat pentru a vizualiza informații despre descărcare. Link-urile către descărcări pot fi trimise prin e-mail pentru descărcarea pe un computer.

D2H firmware

Selectaţi sistemul de operare.

  • Windows
  • Mac OS

Acest program pentru actualizarea software-ului este destinat produselor deţinute de clienţi enumerate mai sus (numite „produse vizate”) şi este oferit numai după acceptarea acordului menţionat mai jos. Selectând „Accept” şi dând clic pe „Descărcare”, se consideră că aţi acceptat termenii şi condiţiile acordului. Înainte de a începe descărcarea, asiguraţi-vă că aţi înţeles termenii acordului.

About this firmware:

This firmware update upgrades the Nikon D2H 'A' firmware to version 2.02. Both Firmware A and B must be upgraded to 2.00 or later before proceding with this update.  to download the v2.01 D2H firmware update for firmware A and B. If this firmware version is already installed on your camera then you do not need to proceed with this update.
The following changes have been made:
-     A problem with the D2H focusing when used with the AF-S DX VR Zoom-Nikkor 18-200mm f/3.5-5.6G IF-ED lens at the wide-angle position has been fixed. In some rare cases, the D2H is unable to acquire accurate focus on near subjects when auto focusing starts from the infinity position.

Quick guide for download and installing this firmware
  1. Download and expand the firmware files.
  2. Format an approved CF card in the camera.
  3. Remove WT-1 or set transceiver to off.
  4. Connect camera to computer (in MSC USB mode) or use a CF Card Reader (if copying the firmware update to memory card, do not use the Lexar Media JumpShot USB cable. The D2H firmware update may not perform correctly).
  5. Copy to the top level of the card the downloaded “AD2H0202.bin”.
  6. Disconnect the camera from computer.
  7. Turn camera on and press the "Menu" button, then select "Firmware Ver".
  8. Follow the camera's on-screen menus.
  9. At completion of upgrade turn the camera off.
  10. Re-format Card.

For a detailed guide for downloading and installing this firmware click here

Compatible OS:
Windows 98 SE
Windows 2000
Windows ME
Windows XP
Special Notes
When the WT-1 is attached, the D2H firmware cannot be updated if 'Transceiver' in the setup/wireless LAN menu is turned on.  Remove the WT-1 before updating the D2H firmware or set 'Transceiver' in the setup/wireless LAN menu to off.Be aware that proper operation of your D2H is not guaranteed if B firmware has not upgraded to version 2.00 or later before proceeding with this update. This download includes the following file(s): D2Hv202.exe General Instructions - for general instructions on how to download and open compressed files. License Agreement - to view the Nikon License Agreement. Click here to agree to the License Agreement and START download File size - 149 KB
About this firmware:

This firmware update upgrades the Nikon D2H 'A' firmware to version 2.02. Both Firmware A and B must be upgraded to 2.00 or later before proceding with this update.  to download the v2.01 D2H firmware update for firmware A and B. If this firmware version is already installed on your camera then you do not need to proceed with this update.
The following changes have been made:
-     A problem with the D2H focusing when used with the AF-S DX VR Zoom-Nikkor 18-200mm f/3.5-5.6G IF-ED lens at the wide-angle position has been fixed. In some rare cases, the D2H is unable to acquire accurate focus on near subjects when auto focusing starts from the infinity position.

Quick guide for download and installing this firmware
  1. Download and expand the firmware files.
  2. Format an approved CF card in the camera.
  3. Remove WT-1 or set transceiver to off.
  4. Connect camera to computer (in MSC USB mode) or use a CF Card Reader (if copying the firmware update to memory card, do not use the Lexar Media JumpShot USB cable. The D2H firmware update may not perform correctly).
  5. Copy to the top level of the card the downloaded “AD2H0202.bin”.
  6. Disconnect the camera from computer.
  7. Turn camera on and press the "Menu" button, then select "Firmware Ver".
  8. Follow the camera's on-screen menus.
  9. At completion of upgrade turn the camera off.
  10. Re-format Card.

For a detailed guide for downloading and installing this firmware click here

Compatible OS:
Macintosh 9.0.4
Macintosh 9.1
Macintosh 9.2
Macintosh OS X 10.1.3 or later
Special Notes
When the WT-1 is attached, the D2H firmware cannot be updated if 'Transceiver' in the setup/wireless LAN menu is turned on.  Remove the WT-1 before updating the D2H firmware or set 'Transceiver' in the setup/wireless LAN menu to off.Be aware that proper operation of your D2H is not guaranteed if B firmware has not upgraded to version 2.00 or later before proceeding with this update. This download includes the following file(s): D2Hv202.sit General Instructions - for general instructions on how to download and open compressed files. License Agreement - to view the Nikon License Agreement. Click here to agree to the License Agreement and START download File size - 156 KB

Acord de licenţă pentru utilizatorul final

Înapoi

Fişierele PDF pot fi vizualizate utilizând software-ul gratuit Adobe® Reader®.
Descărcaţi Adobe® Reader®.

Înapoi la început