- Centro de Transferências
- Firmware SB-900
Apesar de o seu dispositivo não suportar este serviço de transferência, pode ser usado para exibir informações de transferência. As hiperligações das transferências podem ser enviadas por email para transferir num computador.
Selecione o seu sistema operativo.
Este programa de atualização de software é para o produto pertencente ao cliente acima listado (o "produto afetado") e é fornecido apenas após aceitar o contrato listado abaixo. Ao selecionar "Aceitar" e clicar em "Transferir", considera-se que aceitou os termos e condições do contrato. Certifique-se de que compreende os termos do contrato antes de iniciar a transferência.
About this firmware update
This service provides software for upgrading SB-900 firmware to v5.02.
Cameras that can be used to upgrade SB-900 firmware
D3 - Ensure the latest version of firmware (v2.00) is installed before proceding with this update.
D300 - Ensure the latest version of firmware (v1.10) is installed before proceding with this update.
D3S, D3X, D90, D300S, D700, D3000, D3100, D5000, D7000 - No firmware updates required.
Any required camera firmware updates can be downloaded from here
The following improvements have been made in version 5.02
- With uninterrupted shooting with the SB-900 set to i-TTL mode, images captured just before the flash ceased firing were sometimes overexposed.
This issue has been resolved. By resolving this issue, metering precision has been further increased and the number of times the flash fires has also been increased.
- When the SB-900, set to TTL auto flash mode, is used with a camera supporting the Nikon Creative Lighting System (CLS), flash mode automatically changes to A mode according to camera communication status. That flash mode was previously maintained, but it has been modified so that TTL auto flash mode is restored once the SB-900 again recognizes the camera as a CLS-compatible camera.
How to confirm your Speedlights current firmware version
If the latest firmware versions are already installed on your SB-900, you need not proceed with download or installation of this Firmware Upgrade. Current firmware versions can be verified from the VER (Firmware version) item in the menu.
1. Turn the SB-900 on.
2. Press and hold the OK button for approximatly 2 seconds to display the custom settings
3. Use the selector dial to choose VER. (firmware version). The firmware version will be displayed.
4. Turn the SB-900 off.
Guide for download and installing this firmware update
Updating of a Speedlights firmware requires that it is connected to a compatible camera (D3, D300, D700 or D90). Before starting the update ensure that both the Speedlight and cameras batteries are fully charged. Microdrives cannot be used to perform this firmware upgrade. If the downloaded firmware will be copied to a CompactFlash memory card, do not use the Lexar Media JumpShot USB Cable, t he firmware may not be updated correctly.
1. Create a new folder on your desktop and download the firmware (F-SB900-V502W.exe) to this folder.
2. Format an approved memory card in the camera.
3. Connect the camera to the computer (in MSC Mass Storage USB mode) or use a memory card reader. If MSC Mass Storage USB mode is not available in your camera, a card reader must be used.
4. Run the downloaded files to create the folder titled "SB900Update". This contains the firmware file (SB900502.bin). Copy this .bin file to the top level of the memory card.
5. Disconnect the camera from the computer (if using an memory card reader then insert the memory card to the camera). Connect the Speedlight to the camera and turn both on
6. Press the "Menu" button on the camera, select the SETUP menu and then select "Firmware Version".
7. Select "Update" and follow the camera's on-screen menus. Do not turn the camera or Speedlight off during the upgrade.
8. When a message displays that the upgrade is complete, turn the camera and Speedlight off.
10. Re-format the memory card.
11. Turn the Speedlight on again to confirm that the firmware has successfully been updated.
For detailed instructions on how to install this firmware update click here
System requirements
System requirements | 5MB or more free hard-disk space. 32MB or more free RAM. Built-in USB port. |
Download file | F-SB900-V502W.exe (0.26 MB) |
About this firmware update
This service provides software for upgrading SB-900 firmware to v5.02.
Cameras that can be used to upgrade SB-900 firmware
D3 - Ensure the latest version of firmware (v2.00) is installed before proceding with this update.
D300 - Ensure the latest version of firmware (v1.10) is installed before proceding with this update.
D3S, D3X, D90, D300S, D700, D3000, D3100, D5000, D7000 - No firmware updates required.
Any required camera firmware updates can be downloaded from here.
The following improvements have been made in version 5.02
- With uninterrupted shooting with the SB-900 set to i-TTL mode, images captured just before the flash ceased firing were sometimes overexposed.
This issue has been resolved. By resolving this issue, metering precision has been further increased and the number of times the flash fires has also been increased.
- When the SB-900, set to TTL auto flash mode, is used with a camera supporting the Nikon Creative Lighting System (CLS), flash mode automatically changes to A mode according to camera communication status. That flash mode was previously maintained, but it has been modified so that TTL auto flash mode is restored once the SB-900 again recognizes the camera as a CLS-compatible camera.
How to confirm your Speedlights current firmware version
If the latest firmware versions are already installed on your SB-900, you need not proceed with download or installation of this Firmware Upgrade. Current firmware versions can be verified from the VER (Firmware version) item in the menu.
1.Turn the SB-900 on.
2. Press and hold the OK button for approximatly 2 seconds to display the custom settings
3. Use the selector dial to choose VER. (firmware version). The firmware version will be displayed.
4. Turn the SB-900 off.
Guide for download and installing this firmware update
Updating of a Speedlights firmware requires that it is connected to a compatible camera (D3, D300, D700 or D90). Before starting the update ensure that both the Speedlight and cameras batteries are fully charged. Microdrives cannot be used to perform this firmware upgrade. If the downloaded firmware will be copied to a CompactFlash memory card, do not use the Lexar Media JumpShot USB Cable, t he firmware may not be updated correctly.
1. Download the firmware (F-SB900-V502M.sit.hqx) and extract the firmware file.
2. Format an approved memory card in the camera.
3. Connect the camera to the computer (in MSC Mass Storage USB mode) or use a memory card reader.
4. Copy the firmware file (SB900502.bin) to the top level of the memory card.
5. Disconnect the camera from the computer (if using an memory card reader then insert the memory card to the camera). Connect the Speedlight to the camera and turn both on
6. Press the "Menu" button on the camera, select the SETUP menu and then select "Firmware Version".
7. Select "Update" and follow the camera's on-screen menus. Do not turn the camera or Speedlight off during the upgrade.
8. When a message displays that the upgrade is complete, turn the camera and Speedlight off.
10. Re-format the memory card.
11. Turn the Speedlight on again to confirm that the firmware has successfully been updated.
For detailed instructions on how to install this firmware update click here
System requirements
System requirements | Operating system: Mac OS 9.0.4–9.2.2; Mac OS X version 10.1.5–10.5.3 Processor: Power PC G3 or better Hard-disk space: 5 MB or more |
Download file | F-SB900-V502M.sit.hqx (0.22 MB) |
F-SB900-V502W.exe
(Aprox. 266.73 KB)
F-SB900-V502M.sit.hqx
(Aprox. 227.98 KB)
Os ficheiros PDF podem ser visualizados utilizando o sofwtare gratuito Adobe® Reader®.
Transfira o Adobe® Reader®.