Português

Apesar de o seu dispositivo não suportar este serviço de transferência, pode ser usado para exibir informações de transferência. As hiperligações das transferências podem ser enviadas por email para transferir num computador.

D2H firmware

Selecione o seu sistema operativo.

  • Windows
  • Mac OS

Este programa de atualização de software é para o produto pertencente ao cliente acima listado (o "produto afetado") e é fornecido apenas após aceitar o contrato listado abaixo. Ao selecionar "Aceitar" e clicar em "Transferir", considera-se que aceitou os termos e condições do contrato. Certifique-se de que compreende os termos do contrato antes de iniciar a transferência.

About this firmware:

This firmware update upgrades the Nikon D2H 'A' firmware to version 2.02. Both Firmware A and B must be upgraded to 2.00 or later before proceding with this update.  to download the v2.01 D2H firmware update for firmware A and B. If this firmware version is already installed on your camera then you do not need to proceed with this update.
The following changes have been made:
-     A problem with the D2H focusing when used with the AF-S DX VR Zoom-Nikkor 18-200mm f/3.5-5.6G IF-ED lens at the wide-angle position has been fixed. In some rare cases, the D2H is unable to acquire accurate focus on near subjects when auto focusing starts from the infinity position.

Quick guide for download and installing this firmware
  1. Download and expand the firmware files.
  2. Format an approved CF card in the camera.
  3. Remove WT-1 or set transceiver to off.
  4. Connect camera to computer (in MSC USB mode) or use a CF Card Reader (if copying the firmware update to memory card, do not use the Lexar Media JumpShot USB cable. The D2H firmware update may not perform correctly).
  5. Copy to the top level of the card the downloaded “AD2H0202.bin”.
  6. Disconnect the camera from computer.
  7. Turn camera on and press the "Menu" button, then select "Firmware Ver".
  8. Follow the camera's on-screen menus.
  9. At completion of upgrade turn the camera off.
  10. Re-format Card.

For a detailed guide for downloading and installing this firmware click here

Compatible OS:
Windows 98 SE
Windows 2000
Windows ME
Windows XP
Special Notes
When the WT-1 is attached, the D2H firmware cannot be updated if 'Transceiver' in the setup/wireless LAN menu is turned on.  Remove the WT-1 before updating the D2H firmware or set 'Transceiver' in the setup/wireless LAN menu to off.Be aware that proper operation of your D2H is not guaranteed if B firmware has not upgraded to version 2.00 or later before proceeding with this update. This download includes the following file(s): D2Hv202.exe General Instructions - for general instructions on how to download and open compressed files. License Agreement - to view the Nikon License Agreement. Click here to agree to the License Agreement and START download File size - 149 KB
About this firmware:

This firmware update upgrades the Nikon D2H 'A' firmware to version 2.02. Both Firmware A and B must be upgraded to 2.00 or later before proceding with this update.  to download the v2.01 D2H firmware update for firmware A and B. If this firmware version is already installed on your camera then you do not need to proceed with this update.
The following changes have been made:
-     A problem with the D2H focusing when used with the AF-S DX VR Zoom-Nikkor 18-200mm f/3.5-5.6G IF-ED lens at the wide-angle position has been fixed. In some rare cases, the D2H is unable to acquire accurate focus on near subjects when auto focusing starts from the infinity position.

Quick guide for download and installing this firmware
  1. Download and expand the firmware files.
  2. Format an approved CF card in the camera.
  3. Remove WT-1 or set transceiver to off.
  4. Connect camera to computer (in MSC USB mode) or use a CF Card Reader (if copying the firmware update to memory card, do not use the Lexar Media JumpShot USB cable. The D2H firmware update may not perform correctly).
  5. Copy to the top level of the card the downloaded “AD2H0202.bin”.
  6. Disconnect the camera from computer.
  7. Turn camera on and press the "Menu" button, then select "Firmware Ver".
  8. Follow the camera's on-screen menus.
  9. At completion of upgrade turn the camera off.
  10. Re-format Card.

For a detailed guide for downloading and installing this firmware click here

Compatible OS:
Macintosh 9.0.4
Macintosh 9.1
Macintosh 9.2
Macintosh OS X 10.1.3 or later
Special Notes
When the WT-1 is attached, the D2H firmware cannot be updated if 'Transceiver' in the setup/wireless LAN menu is turned on.  Remove the WT-1 before updating the D2H firmware or set 'Transceiver' in the setup/wireless LAN menu to off.Be aware that proper operation of your D2H is not guaranteed if B firmware has not upgraded to version 2.00 or later before proceeding with this update. This download includes the following file(s): D2Hv202.sit General Instructions - for general instructions on how to download and open compressed files. License Agreement - to view the Nikon License Agreement. Click here to agree to the License Agreement and START download File size - 156 KB

Contrato de Licença de Utilizador Final

Voltar

Os ficheiros PDF podem ser visualizados utilizando o sofwtare gratuito Adobe® Reader®.
Transfira o Adobe® Reader®.

Voltar ao topo