Firmware COOLPIX L830

This software is for upgrading the COOLPIX L830 firmware to v1.1. Verify your camera’s firmware version using the instructions below. If this latest version is already installed in your camera, you need not update the firmware.

Be sure that you have read and understand the terms of the license agreement before initiating download of this software from the links at the bottom of this page.

Modifications enabled in this version

• An issue that meant in some rare cases after a lens error occurred the camera could not recover even when it was turned off and then on again has been resolved. 

How to verify your cameras current firmware version

If the latest firmware version is already installed on your L830 you need not proceed with download or installation of this Firmware Upgrade. The current firmware version can be verified from the Firmware version item in the camera's setup menu.

1. Turn on the camera.
2. Press the camera’s MENU button to display the menu.
3. Press the multi selector to the left to highlight the menu tab, select the setup tab, and press the OK button.
4. Select Firmware version in the setup menu and press the OK button.
5. The camera's firmware version will be displayed.
6. Turn off the camera.

Quick Install Guide

This is the quick install guide, for detailed instructions click the link below.

Power the camera from AC adapter unit or use a fully charged battery.

1. Create a new folder with an appropriate name on your computer's hard drive.
2. Download the Windows (.EXE) or Mac (.DMG) file from the links at the bottom of this page to the folder created in step 1.
3. Run the downloaded file to create a folder called L830Update which contains the firmware folder.
4. Use a card reader or similar device to copy the firmware folder to the root directory of a memory card formatted in the camera.
5. Insert the memory card into the camera's memory card slot and turn on the camera.
6. Select Firmware version in the camera's setup menu and follow instructions displayed to upgrade the firmware.
7. After the upgrade is complete, turn the camera off and remove the memory card.
8. Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded.

Windows: Detailed Firmware Upgrade instructions

Mac: Detailed Firmware Upgrade instructions

System Requirements