فارسی

با اینکه دستگاه شما از این سرویس دانلود پشتیبانی نمی‌کند، می‌توانید از آن برای مشاهده اطلاعات دانلود استفاده کنید. لینک دانلودها از طریق ایمیل قابل ارسال است تا بتوانید دانلود را در کامپیوتر نیز انجام دهید.

COOLPIX P7000ثابت‌افزار نیکون نسخه

سیستم عامل خود را انتخاب کنید.

  • Windows
  • Mac OS

این برنامه به‌روزرسانی نرم‌افزار برای محصول فوق‌الذکر است که تحت مالکیت مشتری قرار دارد («محصول مشمول») و تنها در صورتی عرضه می‌شود که توافق‌نامه زیر مورد پذیرش قرار گیرد. با انتخاب گزینه «پذیرش» و کلیک بر روی «دانلود»، فرض بر آن است که شرایط و ضوابط توافق‌نامه را پذیرفته‌اید. پیش از شروع دانلود، حتماً شرایط توافق‌نامه را به دقت مطالعه کنید.

This service provides software for upgrading the COOLPIX P7000 firmware from v1.0 or v1.1 to v1.2. Verify your camera’s firmware version using the instructions below. If this latest version is already installed in your camera, you need not update the firmware.

Be sure that you have read and understand the terms of the license agreement before initiating download of this software from the links at the bottom of this page.

Modifications enabled in this version

  • Autofocus performance has been increased for more reliable focus acquisition on the intended subject, reducing the number of cases in which focus on the subject was not acquired or focus was acquired on the background when the shutter-release button was pressed halfway.
  • Auto bracketing and the self timer can now be enabled at the same time.
  • Aperture settings at or near maximum aperture were grayed out and apparently unavailable for selection (selection was actually possible) when the following procedure was performed.  This issue has been resolved.
    1. An aperture value other than maximum aperture was applied with shooting in [A] (aperture-priority auto) mode.
    2. The camera was turned off .
    3. The camera was turned on again.
    4. The user attempted to adjust the aperture setting (aperture settings at or near maximum aperture grayed out).
  • An issue that prevented operation of the specified function when the shutter-release button was pressed while the Fn (function) button was held down in [M] (manual) mode has been resolved.
  • An issue that in some rare cases caused inaccurate shutter speed display in [M] (manual) mode has been resolved.
  • An issue that caused an asterisk (*) to be displayed, and continue to be displayed even when settings were reverted to their default values,  next to the Vivid Picture Control (COOLPIX Picture Control) option when User Setting U3 was enabled has been resolved.
  • The results of adjustments to White balance>Choose color temp. using the P7000's NRW (RAW) processing function on NRW (RAW) images were the opposite of those achieved with adjustment of NEF (RAW) images captured with Nikon digital-SLR cameras (higher settings resulted in bluer images while lower settings resulted in redder images).  P7000 settings have been reversed for operation and results similar to that of D-SLR cameras.
  • An issue that in some extremely rare cases caused NRW (RAW) images to become completely black with editing using the camera's NRW (RAW) processing function or with RAW processing using ViewNX 2 has been resolved.
  • An issue that caused borders and outlines in images to appear rough with playback on an HDTV when the camera was connected to the TV via an HDMI cable has been resolved.

How to verify your cameras current firmware version

If the latest firmware version is already installed on your P7000 you need not proceed with download or installation of this Firmware Upgrade. The current firmware version can be verified from the Firmware version item in the camera's setup menu.

  1. Turn on the camera.
  2. Press the MENU button to display the menu screen.  
  3. Select the Setup Menu.  
  4. Select Firmware version from the setup menu.
  5. The camera's firmware version will be displayed.  
  6. Turn off the camera.

Quick Install Guide

This is the quick install guide, for detailed instructions click the link below.

Power the camera from AC adapter unit or use a fully charged battery.

  1. Create a new folder with an appropriate name on your computer's hard drive.
  2. Download the Windows (.EXE) or Mac (.DMG) file from the links at the bottom of this page to the folder created in step 1.
  3. Run the downloaded file to create a folder called P7000Update which contains the firmware folder.
  4. Use a card reader or similar device to copy the firmware folder to the root directory of a formatted SD memory card.   
  5. Insert the memory card into the camera's memory card slot and turn on the camera.
  6. Select Firmware version from the camera's setup menu and follow instructions displayed to upgrade the firmware.
  7. After the upgrade is complete, turn the camera off and remove the memory card.
  8. Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded.

Windows:
Detailed Firmware Upgrade instructions		Mac:
Detailed Firmware Upgrade instructions

System Requirements

Windows

Operating System
Microsoft Windows 7 (all editions)
Microsoft Windows Vista (all editions)
Microsoft Windows XP Professional
Microsoft Windows XP Home Edition
Microsoft Windows 2000 Professional
Microsoft Windows ME
Microsoft Windows 98 Second Edition (SE)
*SD Card reader or computer with built-in SD memory card slot required.

Mac OS X

Operating System
Mac OS X version 10.1.5 - 10.7.2

Download file: F-P7000-V12W.exe (9.12 MB)
Contains the following file: firmware.bin

Download file: F-P7000-V12W.dmg (10.65 MB)
Contains the following file: firmware.bin

This software is based in part on the work of the Independent JPEG Group.

توافق‌نامه مجوز کاربر نهایی

برگشت

برای مشاهده فایل‌های PDF، می‌توانید از نرم‌افزار رایگان ‎Adobe® Reader®‎ استفاده کنید.
‎Adobe® Reader®‎ را دانلود کنید.

برگشت به بالا