English

Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.

NX Studio

Select your operating system.

  • Windows
  • Mac OS

This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.

About NX Studio

NX Studio software offers a full-fledged suite of intuitive tools for viewing, processing, and editing photos. Not only can it be used to process RAW pictures, but its editing tools—including tone curves and brightness and contrast adjustment—can also be applied to JPEG/TIFF images. It also offers a variety of features for such tasks as editing XMP/IPTC data, managing presets, and uploading pictures to the Web.

Notices
  • • This software is distributed as a file named “S-NXSTDO-011000WF-ALLIN-ALL___.exe”. Download and run the file to perform the update.
  • • When performing the update, log in to an account with administrator privileges.
  • • Before launching the installer, exit any other applications that may be running, including anti-virus software.
  • • Read the information below before proceeding.
Product Description
Name NX Studio Version 1.10.0
File name S-NXSTDO-011000WF-ALLIN-ALL___.exe
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
System requirements
Operating system Microsoft Windows 11
Note: Pre-installed 64-bit editions only.
CPU Intel Core i series or better (6 core or better Core i series or Xeon processors recommended)
Note: Video footage may sometimes not play back smoothly even on systems that meet the recommended requirements.
RAM 4 GB or more (8 GB or more recommended)
Hard disk space A minimum of 1 GB of free disk space available on the start-up disk at installation and when the software is running (3 GB or more recommended)
Monitor
  • Resolution: 1280 × 720 pixels or more (1920 × 1080 pixels or more recommended)
  • Colors: 24-bit color (True Color) or more
File transfer
  • • Interface: Built-in USB port required. File transfer may not function as expected if the camera is connected via a USB hub.
  • • Supported digital cameras: Nikon cameras that support MTP/PTP or PTP and Mass Storage.
  • • Nikon Transfer 2 cannot be used with the cameras listed below. Use a card reader to copy pictures to the computer.
    • - COOLPIX 990, COOLPIX 950, COOLPIX 910, COOLPIX 900, COOLPIX 880, COOLPIX 800, COOLPIX 700, COOLPIX 600, COOLPIX 300, or COOLPIX 100
  • • The following cameras cannot be connected to a computer for image transfer using Nikon Transfer 2. Use a card reader.
    • - D1, D1X, D1H
Supported digital cameras
  • • The Z9, Z8, Z6III, Z7II, Z6II, Z7, Z6, Z5II, Z5, Zf, Z50II, Z50, Z30, Zfc, and ZR
  • • All Nikon digital SLR cameras from the D1 (released in 1999) to the D780 (released in January 2020) and the D6
  • • All Nikon 1 cameras from the V1 and J1 (released in 2011) to the J5 (released in April 2015)
  • • All COOLPIX cameras from the COOLPIX E100 (released in 1997) to the COOLPIX P1100
  • • The KeyMission 360, KeyMission 170, and KeyMission 80
Note: Some of the above products may not have been announced or released in all countries or regions.
Supported file formats
  • • JPEG images (Exif 2.2–2.3 compliant)
  • • NEF/NRW (RAW) and TIFF images, MPO-format 3D images, videos, audio, Image Dust Off data, track log data, and altitude and depth log data created with Nikon digital cameras
  • • NEF/NRW (RAW), TIFF (RGB), and JPEG (RGB) images and MP4, MOV, and AVI videos created with Nikon software
  • Note: For more information on supported formats, see online help.
Notes
  • • An internet connection is required to access all features including sign-in with Nikon ID, online help, web services, and update information.
  • • By default, selecting a video file and clicking [Edit Video] in the toolbar launches the standard application of your operating system; however, it does not automatically open the file. Open the file in the operating system's standard application or select a different application from [Open with Application] in the options dialog.
  • • The link with Camera Control Pro 2 via [Show Image Immediately After Shooting] cannot be used with Camera Control 2 version 2.33.1 or earlier.
  • • Some time may be needed for Nikon Transfer 2 to transfer large quantities of files or data, in which case the pictures should be transferred in small batches.
  • • Thumbnail display, preview, and playback are not available for N-RAW (extension “.NEV”) and R3D NE (extension “.R3D”) videos.
  • • Playback of ProRes 422 HQ video is not supported.
  • • Thumbnail display, preview, and playback are not available with ProRes RAW video.
  • • Playback of H.265 video shot using Nikon cameras requires a plugin. Follow the on-screen instructions when viewing H.265 video.

For information on using this software, select [NX Studio Help] in the NX Studio [Help] menu.

Changes from Version 1.9.1 to 1.10.0
  • • Added support for the ZR.
  • • Added [Film grain] to the [Adjustments] pane.
  • • Added [Dehaze] to the [Adjustments] pane.
  • • Added support for R3D NE (extension “.R3D”) videos.
    Note: Thumbnail display, preview, and playback are not available for R3D NE videos.
  • • Video editing applications can now be specified. As a result, Movie Editor video editing software is no longer available.
  • • Videos can now only be viewed as thumbnails.
  • • Creating videos from Motion Snapshots or slideshows is no longer supported.
  • • Slideshows can now be created only from photos.
  • • Ended support for Windows 10.
  • • Fixed the following issues:
    • - Colors in RAW pictures sometimes changed when the original value was selected for the [Picture Control] tool in the [Adjustments] pane.
    • - Adjusting or labeling pictures sometimes caused the thumbnails to appear darker.
    • - File conversion of RAW (NEF) pictures using [Export] in the toolbar was sometimes unavailable if these pictures were taken with [Content Credentials] set [ON] on the Z6III.
    • - The output color was not always accurate when pictures were printed from [Print] in the toolbar.
Installation
  1. Create a folder on the hard disk and name it as desired.
  2. Download S-NXSTDO-011000WF-ALLIN-ALL___.exe to the folder created in Step 1.
  3. Run S-NXSTDO-011000WF-ALLIN-ALL___.exe to launch the installer.
  4. Follow the on-screen instructions to complete installation.
Notices
  • • This software is distributed as a file named “S-NXSTDO-011000MF-ALLIN-ALL___.dmg”. Download and run the file to perform the update.
  • • When performing the update, you will be prompted for the administrator password.
  • • Before launching the installer, exit any other applications that may be running, including anti-virus software.
  • • Read the information below before proceeding.
Product Description
Name NX Studio Version 1.10.0
File name S-NXSTDO-011000MF-ALLIN-ALL___.dmg
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
System requirements
Operating system
  • macOS Sequoia version 15
  • macOS Sonoma version 14
  • macOS Ventura version 13
CPU 6 core or better Intel or Apple Silicon
RAM 4 GB or more (8 GB or more recommended)
Hard disk space A minimum of 1 GB of free disk space available on the start-up disk at installation and when the software is running (3 GB or more recommended)
Monitor
  • Resolution: 1280 × 720 pixels or more (1920 × 1080 pixels or more recommended)
  • Colors: 24-bit color (millions of colors) or more
File transfer
  • • Interface: Built-in USB port required. File transfer may not function as expected if the camera is connected via a USB hub.
  • • Supported digital cameras: Nikon cameras that support MTP/PTP or PTP and Mass Storage.
  • • Nikon Transfer 2 cannot be used with the cameras listed below. Use a card reader to copy pictures to the computer.
    • - COOLPIX 990, COOLPIX 950, COOLPIX 910, COOLPIX 900, COOLPIX 880, COOLPIX 800, COOLPIX 700, COOLPIX 600, COOLPIX 300, or COOLPIX 100
  • • The following cameras cannot be connected to a computer for image transfer using Nikon Transfer 2. Use a card reader.
    • - D1, D1X, D1H
Supported digital cameras
  • • The Z9, Z8, Z6III, Z7II, Z6II, Z7, Z6, Z5II, Z5, Zf, Z50II, Z50, Z30, Zfc, and ZR
  • • All Nikon digital SLR cameras from the D1 (released in 1999) to the D780 (released in January 2020) and the D6
  • • All Nikon 1 cameras from the V1 and J1 (released in 2011) to the J5 (released in April 2015)
  • • All COOLPIX cameras from the COOLPIX E100 (released in 1997) to the COOLPIX P1100
  • • The KeyMission 360, KeyMission 170, and KeyMission 80
Note: Some of the above products may not have been announced or released in all countries or regions.
Supported file formats
  • • JPEG images (Exif 2.2–2.3 compliant)
  • • NEF/NRW (RAW) and TIFF images, MPO-format 3D images, movies, audio, Image Dust Off data, track log data, and altitude and depth log data created with Nikon digital cameras
  • • NEF/NRW (RAW), TIFF (RGB), and JPEG (RGB) images and MP4, MOV, and AVI movies created with Nikon software
  • Note: For more information on supported formats, see online help.
Notes
  • • An internet connection is required to access all features including sign-in with Nikon ID, online help, web services, and update information.
  • • By default, selecting a video file and clicking [Edit Video] in the toolbar launches the standard application of your operating system; however, it does not automatically open the file. Open the file in the operating system's standard application or select a different application from [Open with Application] in the options dialog.
  • • The link with Camera Control Pro 2 via [Show Image Immediately After Shooting] cannot be used with Camera Control 2 version 2.33.1 or earlier.
  • • Some time may be needed for Nikon Transfer 2 to transfer large quantities of files or data, in which case the pictures should be transferred in small batches.
  • • Thumbnail display, preview, and playback are not available for N-RAW (extension “.NEV”) and R3D NE (extension “.R3D”) videos.
  • • On macOS, a Keychain Access dialog may appear when Nikon Transfer 2 is launched, and if [Deny] is selected, the application may not function properly. Select [Always Allow] for normal operation.
  • • Declining access in the event that macOS displays a permission dialog may cause unexpected results. To restore normal operation, go to System Preferences > Security & Privacy > Privacy and enable the NX Studio check boxes in Photos and Automation.
  • • Confirmed that updating to macOS 15.1 resolves the issue where Nikon Transfer 2 used on macOS 15.0 did not recognize the camera when HEIF images were on the camera memory card. (As of November 2024)

For information on using this software, select [NX Studio Help] in the NX Studio [Help] menu.

Changes from Version 1.9.1 to 1.10.0
  • • Added support for the ZR.
  • • Added [Film grain] to the [Adjustments] pane.
  • • Added [Dehaze] to the [Adjustments] pane.
  • • Added support for R3D NE (extension “.R3D”) videos.
    Note: Thumbnail display, preview, and playback are not available for R3D NE videos.
  • • Video editing applications can now be specified. As a result, Movie Editor video editing software is no longer available.
  • • Videos can now only be viewed as thumbnails.
  • • Creating videos from Motion Snapshots or slideshows is no longer supported.
  • • Slideshows can now be created only from photos.
  • • Fixed the following issues:
    • - Colors in RAW pictures sometimes changed when the original value was selected for the [Picture Control] tool in the [Adjustments] pane.
    • - Adjusting or labeling pictures sometimes caused the thumbnails to appear darker.
    • - File conversion of RAW (NEF) pictures using [Export] in the toolbar was sometimes unavailable if these pictures were taken with [Content Credentials] set [ON] on the Z6III.
    • - The adjustments made for [Chroma] or [Color Lightness] in the [Lightness, Chroma, and Hue Adjustment] > LCH tool in the [Adjustments] pane were sometimes not applied to images.
Installation
  1. Download S-NXSTDO-011000MF-ALLIN-ALL___.dmg.
  2. Double-click the downloaded file to mount an S-NXSTDO-011000MF-ALLIN-ALL___ disk image containing a “Welcome” file.
  3. Double-click the “Welcome” file to launch the installer.
  4. Follow the on-screen instructions to complete installation.
User's Manual
  • We recommend you read the manual to understand the software basic operations before starting. For your convenience, this manual is also linked from the Help menu in the software.
  •  NX Studio Help  
  •  Nikon Transfer 2 Help  
Related Software

Agreement

  • Download

    S-NXSTDO-011000MF-ALLIN-ALL___.dmg
    (Approx. 191.94 MB)

Back

PDF files can be viewed using free Adobe® Reader® software.
Download Adobe® Reader®.

Return to top