English

Camera Control Pro 2

Select your operating system.

  • Windows
  • Mac OS

This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.

Notices


  • • This software is for current owners of Camera Control Pro 2. For new users, it functions as a trial version that, once installed, can be used for up to 30 days before purchase is required.
  • • This software is distributed as a file named “S-CCPRO_-022800WF-ALLIN-ALL___.exe”. Download and run the file to perform the update.
  • • When performing the update, you may be required to enter the product key to confirm ownership.
  • • Before beginning installation, exit Camera Control Pro 2 and all other applications, including any anti-virus software.
  • • When performing the update, log in to an account with administrator privileges.
  • • The interface after the update will be in the same language as the current software and cannot be changed.
  • • If you are using D5 “C” firmware version 1.20 or later, update Camera Control Pro 2 to the current version, as versions 2.25.0 or earlier will not function as expected.
  • • Users of the D5500 (firmware C version 1.01 or later) or the D5300 (firmware C version 1.01 or later) who use the Windows edition of Camera Control Pro 2 are requested to upgrade to the current version, as versions 2.22.0 or earlier will no longer detect the camera.
  • • If you initiate movie recording using camera controls, a warning may be displayed; close the dialog before ending recording.
  • • Read the information below before proceeding.
Product Description
Name Camera Control Pro 2 Version 2.28.0
File name S-CCPRO_-022800WF-ALLIN-ALL___.exe
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Supported cameras
  • Z 7, Z 6, D5, D4S, D4, D3X, D3S, D3
  • Df, D850, D810, D810A, D800, D800E, D750, D700, D610, D600
  • D500, D300S, D300, D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D90, Nikon 1 V3 (“C” firmware version 1.10 or later)
Note: Some of the above products may not have been announced or released in all countries or regions.
System requirements
Operating system
  • Microsoft Windows 10 Home
  • Microsoft Windows 10 Pro
  • Microsoft Windows 10 Enterprise
  • Microsoft Windows 8.1
  • Microsoft Windows 8.1 Pro
  • Microsoft Windows 8.1 Enterprise
  • Microsoft Windows 7 Home Basic Service Pack 1
  • Microsoft Windows 7 Home Premium Service Pack 1
  • Microsoft Windows 7 Professional Service Pack 1
  • Microsoft Windows 7 Enterprise Service Pack 1
  • Microsoft Windows 7 Ultimate Service Pack 1
Note: Pre-installed versions only. 64- and 32-bit editions supported; software runs as a native 64-bit application under 64-bit editions of Windows.
CPU Intel Celeron, Pentium 4, or Core series, 1 GHz or better
RAM 1 GB or more (1.5 GB or more recommended)
Hard-disk space A minimum of 500 MB available on the start-up disk (1 GB or more recommended)
Monitor
  • Resolution: 1024 × 768 pixels (XGA) or more
  • Colors: 24-bit color (True Color) or more
Interface Built-in USB port required. May not function as expected if camera is connected via a USB hub.
Notes
  • To users of cameras other than the D3, D700, D300S, D300, D5000, and D90: The Explorer, Nikon Transfer 2, and other software will not show the pictures stored on memory cards inserted in the camera. The pictures will be displayed when you exit Camera Control Pro 2.
  • Using AF-F with D4, D800, D800E, D610, D600, D7100, D7000, D5500, D5300, D5200, D5100, and Df cameras: The focus point will not be recorded in the photo information for pictures taken using the Shoot button while AF-F is selected for autofocus mode. Except in the case of the D5200, the focus point will be recorded with pictures taken using the AF and Shoot button, but note that pictures cannot be taken using the AF and Shoot button when AF-F is selected with the D7000.
Changes from Version 2.27.0 to 2.28.0
  • • Added support for the Z 6.
Installation
  1. Create a folder on the hard disk and name it as desired.
  2. Download S-CCPRO_-022800WF-ALLIN-ALL___.exe to the folder created in Step 1.
  3. Run S-CCPRO_-022800WF-ALLIN-ALL___.exe to launch the installer.
  4. Follow the on-screen instructions to complete installation.

Notices


  • • This software is for current owners of Camera Control Pro 2. For new users, it functions as a trial version that, once installed, can be used for up to 30 days before purchase is required.
  • • This software is distributed as a file named “S-CCPRO_-022800MF-ALLIN-64BIT_.dmg”. Download and run the file to perform the update.
  • • When performing the update, you may be required to enter the product key to confirm ownership.
  • • Before beginning installation, exit Camera Control Pro 2 and all other applications, including any anti-virus software.
  • • When performing the update, you will be prompted for the administrator password.
  • • The interface after the update will be in the same language as the current software and cannot be changed.
  • • If you are using D5 “C” firmware version 1.20 or later, update Camera Control Pro 2 to the current version, as versions 2.25.0 or earlier will not function as expected.
  • • This update may result in Wireless Transmitter Utility versions 1.5.6 or earlier being unable to detect the camera in some versions of OS X. Users of the Wireless Transmitter Utility should install version 1.6.0 or later.
  • • Read the information below before proceeding.
Product Description
Name Camera Control Pro 2 Version 2.28.0
File name S-CCPRO_-022800MF-ALLIN-64BIT_.dmg
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Supported cameras
  • Z 7, Z 6, D5, D4S, D4, D3X, D3S, D3
  • Df, D850, D810, D810A, D800, D800E, D750, D700, D610, D600
  • D500, D300S, D300, D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D90, Nikon 1 V3 (“C” firmware version 1.10 or later)
Note: Some of the above products may not have been announced or released in all countries or regions.
System requirements
Operating system
  • macOS Mojave version 10.14
  • macOS High Sierra version 10.13.6
  • macOS Sierra version 10.12.6
CPU Intel Core or Xeon series, 1 GHz or better
RAM 2 GB or more
Hard-disk space A minimum of 500 MB available on the start-up disk (1 GB or more recommended)
Monitor
  • Resolution: 1024 × 768 pixels (XGA) or more
  • Colors: 24-bit color (millions of colors) or more
Interface Built-in USB port required. May not function as expected if camera is connected via a USB hub.
Notes
  • To users of cameras other than the D3, D700, D300S, D300, D5000, and D90: Image Capture, iPhoto, Nikon Transfer 2, and other software will not show the pictures stored on memory cards inserted in the camera. The pictures will be displayed when you quit Camera Control Pro 2.
  • Using AF-F with D4, D800, D800E, D610, D600, D7100, D7000, D5500, D5300, D5200, D5100, and Df cameras: The focus point will not be recorded in the photo information for pictures taken using the Shoot button while AF-F is selected for autofocus mode. Except in the case of the D5200, the focus point will be recorded with pictures taken using the AF and Shoot button, but note that pictures cannot be taken using the AF and Shoot button when AF-F is selected with the D7000.
  • • If Camera Control Pro 2 is launched immediately after you have connected a camera containing a memory card with a large number of images (a few hundred or more), the computer may fail to detect the camera or the camera may be slow to respond. Do not launch Camera Control Pro 2 while the memory card access lamp is lit.
  • • Camera Control Pro 2 is not optimized for dark mode in macOS 10.14 (Mojave).
  • • Declining access in the event that macOS 10.14 (Mojave) displays a permission dialog may cause unexpected results. To restore normal operation, go to System Preferences > Security & Privacy > Privacy and enable the Camera Control Pro 2 check boxes in Photos and Automation.
Changes from Version 2.27.0 to 2.28.0
  • • Added support for the Z 6.
  • • Added support for macOS version 10.14 (Mojave).
  • • Ended support for OS X version 10.11.
  • • Fixed an issue that disabled the live view selector buttons if both live view and Enable Controls on Camera Body were disabled while a Z 7, D5, D4S, D4, D850, D810, D810A, D800, D800E, D750, D610, D600, D500, D7500, D7200, or D7100 camera was connected.
  • • Fixed an issue that under certain conditions reduced the focus-mode options available for the Z 7 to Single-point AF after the focus mode was changed.
Installation
  1. Download S-CCPRO_-022800MF-ALLIN-64BIT_.dmg.
  2. Double-click the downloaded file to mount a “Camera Control Pro 2” disk image containing a “Welcome” file.
  3. Double-click the “Welcome” file to launch the installer.
  4. Follow the on-screen instructions to complete installation.
User's Manual

 Download (2.62 MB) (PDF)

Agreement

Please select your region from the menu list.

  • Download

    S-CCPRO_-022800WF-ALLIN-ALL___.exe
    (Approx. 263.09 MB)

  • Download

    S-CCPRO_-022800WF-ALLIN-ALL___.exe
    (Approx. 263.09 MB)

  • Download

    S-CCPRO_-022800WF-ALLIN-ALL___.exe
    (Approx. 263.09 MB)

  • Download

    S-CCPRO_-022800WF-ALLIN-ALL___.exe
    (Approx. 263.09 MB)

  • Download

    S-CCPRO_-022800WF-ALLIN-ALL___.exe
    (Approx. 263.09 MB)

Please select your region from the menu list.

  • Download

    S-CCPRO_-022800MF-ALLIN-64BIT_.dmg
    (Approx. 117.87 MB)

  • Download

    S-CCPRO_-022800MF-ALLIN-64BIT_.dmg
    (Approx. 117.87 MB)

  • Download

    S-CCPRO_-022800MF-ALLIN-64BIT_.dmg
    (Approx. 117.87 MB)

  • Download

    S-CCPRO_-022800MF-ALLIN-64BIT_.dmg
    (Approx. 117.87 MB)

  • Download

    S-CCPRO_-022800MF-ALLIN-64BIT_.dmg
    (Approx. 117.87 MB)

This download service is not available on your device.

You can send yourself an e-mail with a link to this download for use on another device.

PDF files can be viewed using free Adobe® Reader® software.
Download Adobe® Reader®.

Download Center