Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.
COOLPIX S4100 Firmware
Select your operating system.
This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.
Instructions before updating your firmware
-
This service provides software for upgrading COOLPIX
S4100 firmware to Ver. 1.1
. Verify your camera’s firmware version from the
Firmware version
item in the setup menu. If the firmware version previously indicated is already installed in your camera, you need not update the firmware.
-
Be sure to read the section below regarding modifications enabled with upgrade before upgrading the firmware.
-
The camera may be damaged if power is interrupted or camera controls are operated during the update. Do not turn the camera off, remove or disconnect the power source, or operate camera controls during the update. If the update is not completed successfully and the camera becomes inoperable, take the camera to a Nikon-authorized service representative for inspection.
If, for any reason, you are unsure on how to update your camera’s firmware yourself, please take your camera to an authorized Nikon service representative, where they will perform the update for you.
-
When firmware is updated, images recorded to the camera’s internal memory are erased.
Be sure to back up necessary images recorded to the camera’s internal memory to an SD memory card or computer before upgrading the firmware.
Modifications enabled with firmware Ver. 1.1
-
When the Charging AC Adapter EH-69P and USB Cable UC-E6 were connected to the camera to charge the Rechargeable Li-ion Battery EN-EL19 with the EN-EL19 at or very near full exhaustion, the battery sometimes could not be charged. This issue has been resolved.
Confirming the firmware version
-
Turn on the camera.
-
Tap the ▲ tab at the bottom of the monitor to display the setting controls and tap
(setup).
-
Tap "Firmware version" in the
(setup) menu.
-
The camera's firmware version will be displayed.
-
Turn off the camera.
System Requirements
Software Name:
COOLPIX S4100 Firmware Ver. 1.1
Supported Model(s):
COOLPIX S4100
Supported Version:
Ver. 1.0
Supported Operating System
:
|
Windows
|
Mac
|
|
Microsoft Windows 8
Microsoft Windows 8 Pro
Microsoft Windows 8 Enterprise
Microsoft Windows 7 Home Basic
Microsoft Windows 7 Home Premium
Microsoft Windows 7 Professional
Microsoft Windows 7 Enterprise
Microsoft Windows 7 Ultimate
Microsoft Windows Vista Home Basic
Microsoft Windows Vista Home Premium
Microsoft Windows Vista Business
Microsoft Windows Vista Enterprise
Microsoft Windows Vista Ultimate
Microsoft Windows XP Professional
Microsoft Windows XP Home Edition
|
Mac OS X version 10.1.5 – 10.8.2
|
|
*Card reader or computer with built-in SD memory card slot required.
|
Copyright:
NIKON CORPORATION
Downloads and Instructions
|
Windows
|
Mac
|
|
Instructions for upgrading firmware (
PDF Download
)
Instructions for upgrading firmware (
)
|
Instructions for upgrading firmware (
PDF Download
)
Instructions for upgrading firmware (
)
|
End User License Agreement
