ZR Firmware

• This service supplies software that can be used to update the ZR camera “C” firmware to version 1.10. Before proceeding, select [Firmware version] in the camera [SETUP MENU] and check the camera firmware version. You will not need to download or install this update if the firmware listed above is already installed. • A card reader and computer are required for the firmware update. • Read the information below before proceeding.

Caution: Updating the Firmware Do not update the camera firmware with lenses other than Z-mount NIKKOR lenses or mount adapters other than FTZ II/FTZ attached; failure to observe this precaution could result in camera malfunction.

Changes from “C” Firmware Version 1.01 to 1.10

Note: The changes listed below under “Video Recording”, “Controls”, “Displays”, and “Network” are detailed in the Supplementary Firmware Update Manual. Note: Due to the addition of new menu items, some Custom Settings menu items have been renumbered. ■ Video Recording • Extended the maximum length of footage that can be recorded in a single video session. • Brightness information, including histogram and wave-form monitor, now displays a warning indicator on the brighter side that shows potential loss of detail in highlights when [R3D NE 12-bit (R3D)] is selected for [Video file type]. • You can now also set [Video file type] to [R3D NE 12-bit (R3D)] in [Auto] mode. Note that the shooting mode [M] will automatically be selected. • Added a [Video file naming] item. File names consist of a reel number, clip number, recording date, among other information. • Added [LTC signal input] to [Timecode]. Now the timecode can be synchronized with a timecode generator connected to the external microphone/line input connector. ■ Controls • Increased the maximum number of files displayed to import from g15 [LUT view assist settings] > [Import CUBE file] in the [CUSTOM SETTINGS MENU] to 50. CUBE files with names starting with a period (“.”) are no longer displayed. ■ Displays • Added a [Power-on lamp energy saver] item to the [SETUP MENU]. The power-on lamp remains lit while the camera is turned on when [OFF] is selected. ■ Network • Updated some guidance texts displayed on the camera when connecting to the Nikon Imaging Cloud service (the connection procedure itself remains unchanged). ■ Other Changes • Fixed an issue where noise sometimes occurred in the audio during live streaming (USB streaming).

Viewing the Camera Firmware Version

1. Turn the camera on.
2. Press and hold the camera's menu access button and select [Firmware version] in the [SETUP MENU] to display the camera firmware version.
3. Check the camera firmware version.
4. Turn the camera off.

Product Description

Name	ZR “C” Firmware Version 1.10
Supported cameras	ZR
Supported camera firmware versions	“C” firmware version 1.00
File name	ZR__0110.bin
Copyright	Nikon Corporation
Reproduction	Not permitted

Updating the Camera Firmware

1. Download the following firmware file to your computer.
   Please make sure you have the downloaded firmware file on your computer.
   • ZR__0110.bin (the camera firmware)
2. Using a card reader, copy “ZR__0110.bin” to a memory card that has been formatted in the camera.
   Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
3. Insert the memory card into the camera and turn the camera on.
4. Select [Firmware version] in the [SETUP MENU] and follow the on-screen instructions to complete the firmware update.
5. Once the update is complete, turn the camera off and remove the memory card.
6. Confirm that the firmware has been updated to the new version.

Note: Updates can be performed for you by a Nikon-authorized service representative. Note: The license for the open-source software included in the camera’s NVM Express driver can be found under “BSD License (NVM Express Driver)”.