Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.
Z5II Firmware
Select your operating system.
This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.
-
- • This service supplies software that can be used to update the Z5II camera “C” firmware to version 1.01. Before proceeding, select [Firmware version] in the camera [SETUP MENU] and check the camera firmware version. You will not need to download or install this update if the firmware listed above is already installed.
- • A card reader and computer are required for the firmware update.
- • Read the information below before proceeding.
|
|
Caution: Updating the Firmware
Do not update the camera firmware with lenses other than Z-mount NIKKOR lenses or mount adapters other than FTZ II/FTZ attached; failure to observe this precaution could result in camera malfunction.
Pairing the SnapBridge App with Your Camera (Bluetooth)
A camera previously registered to SnapBridge may not automatically reconnect after the camera "C" firmware was updated from version 1.00. This does not indicate a malfunction as it is due to the change in camera display name following the "C" firmware update to version 1.01. Select [Forget camera] on the SnapBridge app and pair your camera with the app again.
|
- Changes from “C” Firmware Version 1.00 to 1.01
-
- • Updated some guidance texts displayed on the camera when connecting to the Nikon Imaging Cloud service (the connection procedure itself remains unchanged).
- • Changed the camera name displayed when pairing with SnapBridge.
- • Changed the camera name displayed on USB-connected devices when [iPhone] was selected for [USB] in the [NETWORK MENU].
- • Renamed d13 [Display on during burst] in [CUSTOM SETTINGS MENU].
|
- Viewing the Camera Firmware Version
-
- Turn the camera on.
- Press the camera MENU button and select [Firmware version] in the [SETUP MENU] to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.
- Product Description
-
| Name |
Z5II “C” Firmware Version 1.01 |
| Supported cameras |
Z5II |
| Supported camera firmware versions |
“C” firmware version 1.00 |
| File name |
Z5_2_0101.bin |
| Copyright |
Nikon Corporation |
| Reproduction |
Not permitted |
- Updating the Camera Firmware
-
- Download the following firmware file to your computer.
Please make sure you have the downloaded firmware file on your computer.
• Z5_2_0101.bin (the camera firmware)
- Using a card reader, copy “Z5_2_0101.bin” to a memory card that has been formatted in the camera.
Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
- Insert the memory card into the camera and turn the camera on.
- Select [Firmware version] in the [SETUP MENU] and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.
End User License Agreement
