Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.
Z50II Firmware
Select your operating system.
This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.
-
- • This service supplies software that can be used to update the Z50II camera “C” firmware to version 1.01. Before proceeding, select [Firmware version] in the camera [SETUP MENU] and check the camera firmware version. You will not need to download or install this update if the firmware listed above is already installed.
- • A card reader and computer are required for the firmware update.
- • Read the information below before proceeding.
|
- Changes from “C” Firmware Version 1.00 to 1.01
-
- • Pre-Release Capture is now available using a SmallRig SR-RG2.
- • Added “русский” (Russian) to [Language] in [SETUP MENU] for Z50II cameras sold in the Middle East region.
- • Renamed d13 [Display on during burst] in [CUSTOM SETTINGS MENU].
- • Fixed the following issues.
- - In rare cases, the camera would stop responding when the camera was reconnected to SnapBridge after it was connected to Nikon Imaging Cloud while connecting to SnapBridge.
- - In synchronized release, pressing the shutter-release button of the master camera halfway initiated autofocus on the remote camera with the following setting selected.
- ▸ [CUSTOM SETTINGS MENU] > a6 [AF activation] > [AF-ON only]
|
- Viewing the Camera Firmware Version
-
- Turn the camera on.
- Press the camera MENU button and select [Firmware version] in the [SETUP MENU] to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.
- Product Description
-
| Name |
Z50II “C” Firmware Version 1.01 |
| Supported cameras |
Z50II |
| Supported camera firmware versions |
“C” firmware version 1.00 |
| File name |
Z50_2_0101.bin |
| Copyright |
Nikon Corporation |
| Reproduction |
Not permitted |
- Updating the Camera Firmware
-
- Download the following firmware file to your computer.
Please make sure you have the downloaded firmware file on your computer.
• Z50_2_0101.bin (the camera firmware)
- Using a card reader, copy “Z50_2_0101.bin” to a memory card that has been formatted in the camera.
Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
- Insert the memory card into the camera and turn the camera on.
- Select [Firmware version] in the [SETUP MENU] and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.
End User License Agreement
