Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.
COOLPIX P7700 Firmware
Select your operating system.
This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.
This software is for upgrading the COOLPIX P7700 firmware from v1.0, v1.1, and v1.2 to v1.3. Verify your camera’s firmware version using the instructions below. If this latest version is already installed in your camera, you need not update the firmware.
Be sure that you have read and understand the terms of the license agreement before initiating download of this software from the links at the bottom of this page.
Modifications enabled in this version
-
Remaining battery charge is now accurately detected for Rechargeable Li-ion Battery EN-EL14a.
By upgrading firmware to Ver. 1.3, EN-EL14a performance is maximized so that more images can be captured (battery performance) than when an EN-EL14 is used.
With firmware Ver. 1.2 and earlier, the number of images that can be captured (battery performance) when an EN-EL14a is used is less than when an EN-EL14 is used.
Number of shots possible* with the EN-EL14a (rated capacity: DC 7.2 V, 1230 mAh; battery performance with testing in accordance with CIPA standards)
- Still pictures: Approximately 360 shots
- Movie recording (actual battery life for recording): Approximately 1 hour 15 minutes
*See the COOLPIX P7700 user's manual for details on test conditions.
How to verify your cameras current firmware version
If the latest firmware version is already installed on your P7700 you need not proceed with download or installation of this Firmware Upgrade. The current firmware version can be verified from the Firmware version item in the camera's setup menu.
-
Turn on the camera.
-
Press the MENU button to display the menu screen.
-
Press the rotary multi selector to the left to highlight the menu tab, select the setup tab, and press the OK button.
-
Highlight
Firmware version
from the setup menu and press the OK button.
-
The camera's firmware version will be displayed.
-
Turn off the camera.
Quick Install Guide
This is the quick install guide, for detailed instructions click the link below.
Power the camera from AC adapter unit or use a fully charged battery.
-
Create a new folder with an appropriate name on your computer's hard drive.
-
Download the Windows (.EXE) or Mac (.DMG) file from the links at the bottom of this page to the folder created in step 1.
-
Run the downloaded file to create a folder called
P77
00Update
which contains the
firmware folder
.
-
Use a card reader or similar device to copy the
firmware folder
to the root directory of a formatted memory card.
-
Insert the memory card into the camera's memory card slot and turn on the camera.
-
Select
Firmware version
from the camera's setup menu and follow instructions displayed to upgrade the firmware.
-
After the upgrade is complete, turn the camera off and remove the memory card.
-
Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded.
System Requirements
Windows
Operating System
Microsoft Windows 8 (all editions)
Microsoft Windows 7 (all editions)
Microsoft Windows Vista (all editions)
Microsoft Windows XP Professional
Microsoft Windows XP Home Edition
|
Mac OS X
Operating System
Mac OS X version 10.6.8 - 10.8.5
|
|
*SD Card reader or computer with built-in SD memory card slot required. |
|
Download file: F-P7700-V13W.exe (21.33 MB)
Contains the following file: firmware.bin
|
Download file: F-P7700-V13M.dmg (25.14 MB)
Contains the following file: firmware.bin
|
End User License Agreement
Windows
: