English

Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.

D7500 Firmware

Select your operating system.

  • Windows
  • Mac OS

This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.

  • • This service supplies software that can be used to update the D7500 camera “C” firmware to version 1.11. Before proceeding, select Firmware version in the camera SETUP MENU and check the camera firmware version. You will not need to download or install this update if the firmware listed above is already installed.
  • • This update includes all changes made in previous updates.
  • • Read the information below before proceeding.
Changes from “C” Firmware Version 1.10 to 1.11
  • • Fixed an issue occurring during live-view photography with a mix of optically- and radio-controlled flash units that would sometimes result in the optically-controlled units not firing.
  • • Fixed an issue occurring when a flash unit was mounted on the camera that would sometimes result in the camera ignoring the value selected for [ISO sensitivity settings] > [Maximum sensitivity with command dial] in the [PHOTO SHOOTING MENU] after settings were loaded using [Save/load settings] > [Load settings] in the [SETUP MENU].
  • Note
  • Performing a firmware update while the camera is affected by the second of the two issues above will not in itself correct the problem. After performing the update, you will need to either:
    • • reset all settings using [Reset all settings] > [Reset] in the [SETUP MENU], or
    • • load previously-saved settings (if available) from the memory card using [Save/load settings] > [Load settings] in the [SETUP MENU].
Changes from Previous Versions
Changes from “C” Firmware Version 1.01 to 1.10
  • • The camera can now connect via Wi-Fi to devices running SnapBridge. For more information, see the “Addendum to the User’s Manual” in which this feature is described. Before using this feature, upgrade to the following version of the app:
    • - SnapBridge version 2.5.4 or later
  • • Fixed the following issues:
    • - If the mode dial was rotated from P to U1 and then back to P, ISO sensitivity would be set to the value selected for U1.
    • - Repeatedly pressing the zoom in and zoom out buttons during movie live view would cause unexpected behavior when 3840x2160; 30p was selected for Frame size/frame rate in the MOVIE SHOOTING MENU.
Changes from “C” Firmware Version 1.00 to 1.01
  • • The SETUP MENU > Time zone and date > Time zone display now shows only the names of major cities in the currently selected zone.
Viewing the Camera Firmware Version
  1. Turn the camera on.
  2. Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.
  3. Check the camera firmware version.
  4. Turn the camera off.
Product Description
Name D7500 “C” Firmware Version 1.11
Supported cameras D7500
Supported camera firmware versions “C” firmware versions 1.00–1.10
File name F-D7500-V111W.exe
System requirements
  • Microsoft Windows 11
  • Microsoft Windows 10
  • Microsoft Windows 8.1
Note: Card reader or computer with built-in memory-card slot required.
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Updating the Camera Firmware
  1. Create a folder on the computer hard disk and name it as desired.
  2. Download F-D7500-V111W.exe to the folder created in Step 1.
  3. Run F-D7500-V111W.exe to extract the following file to a folder named “D7500Update”:
    • D7500_0111.bin (the camera firmware)
  4. Using a card slot or card reader, copy “D7500_0111.bin” to a memory card that has been formatted in the camera.
    Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
  5. Insert the memory card into the Slot 1 on the camera and turn the camera on.
  6. Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
  7. Once the update is complete, turn the camera off and remove the memory card.
  8. Confirm that the firmware has been updated to the new version.

Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
DSLR_Firmup_Win_En.pdf (PDF) (0.21 MB)

Note: Updates can be performed for you by a Nikon-authorized service representative.

Product Description
Name D7500 “C” Firmware Version 1.11
Supported cameras D7500
Supported camera firmware versions “C” firmware versions 1.00–1.10
File name F-D7500-V111M.dmg
System requirements
  • macOS Monterey version 12
  • macOS Big Sur version 11
  • macOS Catalina version 10.15
  • macOS Mojave version 10.14
  • macOS High Sierra version 10.13
  • macOS Sierra version 10.12
Note: Card reader or computer with built-in memory-card slot required.
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Updating the Camera Firmware
  1. Download F-D7500-V111M.dmg.
  2. Double-click the F-D7500-V111M.dmg icon to mount a disk image containing a folder named “D7500Update”, which in turn contains the following file:
    • D7500_0111.bin (the camera firmware)
  3. Using a card slot or card reader, copy “D7500_0111.bin” to a memory card that has been formatted in the camera.
    Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
  4. Insert the memory card into the Slot 1 on the camera and turn the camera on.
  5. Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
  6. Once the update is complete, turn the camera off and remove the memory card.
  7. Confirm that the firmware has been updated to the new version.

Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
DSLR_Firmup_Mac_En.pdf (PDF) (0.17 MB)

Note: Updates can be performed for you by a Nikon-authorized service representative.

End User License Agreement

  • Download

    F-D7500-V111W.exe
    (Approx. 22.81 MB)

  • Download

    F-D7500-V111M.dmg
    (Approx. 25.20 MB)

PDF files can be viewed using free Adobe® Reader® software.
Download Adobe® Reader®.