English

Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.

AF-S NIKKOR 70-200mm f/2.8E FL ED VR Firmware

Select your operating system.

  • Windows
  • Mac OS

This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.

  • • This service supplies software that can be used to update the firmware for AF-S NIKKOR 70-200mm f/2.8E FL ED VR lenses to version 1.01. You will not need to download or install this update if the firmware listed above is already installed.
  • • This firmware update is performed with an AF-S NIKKOR 70-200mm f/2.8E FL ED VR lens attached to a camera. See “Compatible Cameras” for a list of compatible cameras.
  • • Read the information below before proceeding.
Compatible Cameras
  • The following cameras can be used to update the firmware for AF-S NIKKOR 70-200mm f/2.8E FL ED VR lenses:
    • • The D6, D5, D850, D780, D500, D7500, D3500, and D3400
    • • All Z-series cameras (FTZ or FTZ II required)
  • Note: Other cameras cannot be used.
  • Note: Updates can be performed for you by a Nikon-authorized service representative.
Changes from Firmware Version 1.00 to 1.01
  • • Reduced the amount of vibration generated by the lens during autofocus.
Viewing the Lens Firmware Version
  1. Attach an AF-S NIKKOR 70-200mm f/2.8E FL ED VR lens to the camera and turn the camera on.
  2. Press the camera MENU button and select SETUP MENU > Firmware version to display the camera and lens firmware versions.
  3. Check the firmware version.
  4. Turn the camera off.
Product Description
Name AF-S NIKKOR 70-200mm f/2.8E FL ED VR Firmware Version 1.01
Supported lenses AF-S NIKKOR 70-200mm f/2.8E FL ED VR
Supported lens firmware versions Firmware version 1.00
File name F-LFAFS70-200F2.8EFLEDVR-V0101W.exe
System requirements
  • Microsoft Windows 10 Home
  • Microsoft Windows 10 Pro
  • Microsoft Windows 10 Enterprise
  • Microsoft Windows 8.1
  • Microsoft Windows 8.1 Pro
  • Microsoft Windows 8.1 Enterprise
Note: Card reader or computer with built-in memory-card slot required.
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Updating the Lens Firmware
  1. Create a folder on the computer hard disk and name it as desired.
  2. Download F-LFAFS70-200F2.8EFLEDVR-V0101W.exe to the folder created in Step 1.
  3. Run F-LFAFS70-200F2.8EFLEDVR-V0101W.exe to extract the following file to a folder named “AFS70-200F2.8EFLEDVRUpdate”:
    • LFAFS70_200F28EFLEDVR0101.bin (the lens firmware)
  4. Using a card slot or card reader, copy “LFAFS70_200F28EFLEDVR0101.bin” to a memory card that has been formatted in the camera.
    Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
  5. Insert the memory card into the camera and turn the camera on.
  6. Select SETUP MENU > Firmware version and follow the on-screen instructions to perform the firmware update.
  7. When a message is displayed stating that the update is complete, turn the camera off and remove the memory card.
  8. Turn the camera on and confirm that the firmware has been updated to the new version.

Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
NIKKOR_FirmUp_Win_En.pdf (PDF) (0.32 MB)

Note: Updates can be performed for you by a Nikon-authorized service representative.

Product Description
Name AF-S NIKKOR 70-200mm f/2.8E FL ED VR Firmware Version 1.01
Supported lenses AF-S NIKKOR 70-200mm f/2.8E FL ED VR
Supported lens firmware versions Firmware version 1.00
File name F-LFAFS70-200F2.8EFLEDVR-V0101M.dmg
System requirements
  • macOS Catalina version 10.15
  • macOS Mojave version 10.14
  • macOS High Sierra version 10.13
  • macOS Sierra version 10.12
Note: Card reader or computer with built-in memory-card slot required.
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Updating the Lens Firmware
  1. Download F-LFAFS70-200F2.8EFLEDVR-V0101M.dmg.
  2. Double-click the F-LFAFS70-200F2.8EFLEDVR-V0101M.dmg icon to mount a disk image containing a folder named “AFS70-200F2.8EFLEDVRUpdate”, which in turn contains the following file:
    • LFAFS70_200F28EFLEDVR0101.bin (the lens firmware)
  3. Using a card slot or card reader, copy “LFAFS70_200F28EFLEDVR0101.bin” to a memory card that has been formatted in the camera.
    Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
  4. Insert the memory card into the camera and turn the camera on.
  5. Select SETUP MENU > Firmware version and follow the on-screen instructions to perform the firmware update.
  6. When a message is displayed stating that the update is complete, turn the camera off and remove the memory card.
  7. Turn the camera on and confirm that the firmware has been updated to the new version.

Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
NIKKOR_FirmUp_Mac_En.pdf (PDF) (0.26 MB)

Note: Updates can be performed for you by a Nikon-authorized service representative.

End User License Agreement

  • Download

    F-LFAFS70-200F2.8EFLEDVR-V0101W.exe
    (Approx. 463.44 KB)

  • Download

    F-LFAFS70-200F2.8EFLEDVR-V0101M.dmg
    (Approx. 397.03 KB)

PDF files can be viewed using free Adobe® Reader® software.
Download Adobe® Reader®.