English

Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on another device.

Z 6 Firmware

Select your operating system.

  • Windows
  • Mac OS

This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.

  • • This service supplies software that can be used to update the Z 6 camera “C” firmware to version 2.20. Before proceeding, select Firmware version in the camera SETUP MENU and check the camera firmware version. You will not need to download or install this update if the firmware listed above is already installed.
  • • This update includes all changes made in previous updates.
  • • Performing this update requires an XQD memory card and card reader.
  • • Updates can be performed for you by a Nikon-authorized service representative.
  • • Read the information below before proceeding.
Changes from “C” Firmware Version 2.10 to 2.20
  • • Added support for Type B Sony CFexpress memory cards.
    • Note: For information on the license for the open-source software included in the camera’s NVM Express driver, see “BSD License (NVM Express Driver)”.
  • • Added support for distortion control with AF-S NIKKOR 120–300mm f/2.8E FL ED SR VR F-mount lenses.
  • • Fixed an issue that resulted in colored lines appearing at the bottom of the display when pictures shot in demo mode with FX (36x24) selected for image area were viewed at zoom ratios over 100%.
Changes from Previous Versions
Changes from “C” Firmware Version 2.01 to 2.10
  • • Added supported for optical VR with NIKKOR Z DX 16–50mm f/3.5–6.3 VR and NIKKOR Z DX 50–250mm f/4.5–6.3 VR Z-mount lenses. Note that attaching these lenses disables the Mechanical shutter option for Custom Setting d5 (Shutter type) in Group d (Shooting/display) of the CUSTOM SETTING MENU, leaving a choice of Auto and Electronic front-curtain shutter options only.
  • • ISO sensitivity can now be adjusted using the lens control ring, and ISO sensitivity has been added to the options available for Custom Setting f2 (Custom control assignment) > Lens control ring in Group f (Controls) of the CUSTOM SETTING MENU.
  • • As of November 14, 2019, the aperture display in the lens info panel for NIKKOR Z 24–70mm f/2.8 S and NIKKOR Z 58mm f/0.95 S Noct lenses shows both the current aperture and adjacent aperture values in modes A and M.
  • • When On was selected for Auto ISO sensitivity control and an option that does not include “slow sync” was selected for Flash mode, shutter speed was formerly restricted to values between those chosen for Custom Settings e1 (Flash sync speed) and e2 (Flash shutter speed), but this has now been changed to match the behavior of digital SLR cameras, with the result that the minimum shutter speed now corresponds to the value selected for Auto ISO sensitivity control > Minimum shutter speed.
  • • Fixed an issue that in extremely rare cases resulted in the camera failing to correctly record movies with 1920x1080; 120p selected for Frame size/frame rate.
  • • Fixed an issue that occasionally resulted in “noise” in the form of white lines at the bottom of the display when the electronic viewfinder was on.
  • • Fixed an issue that in rare cases resulted in “noise” in the form of fine horizontal lines appearing throughout the frame in movies and the live view display.
  • • Fixed errors in the UTC time zones for the following three cities in the Time zone and date > Time zone display in the SETUP MENU:
    • Caracas: was -4:30, is now -4:00
    • Casablanca: was 00:00, is now +1:00
    • Ankara: was +2:00, is now +3:00
  • • Fixed an issue that resulted in an incorrect date of creation being displayed in the Windows 10 “properties” dialogs for movies and time-lapse movies created with the camera, as well as copies created with camera movie editing controls.
Changes from “C” Firmware Version 2.00 to 2.01
  • Fixed the following issues:
    • • If the camera detected faces during still photography or movie recording at the settings listed below, it would in very rare instances begin to respond more slowly, display an error, or stop responding altogether.
      • Still Photography
      • Auto-area AF selected for AF-area mode in the PHOTO SHOOTING MENU
      • Face and eye detection on or Face detection on selected for Custom Setting a4 (Auto-area AF face/eye detection) in the CUSTOM SETTING MENU
      • Movie Recording
      • Auto-area AF selected for AF-area mode in the MOVIE SHOOTING MENU
      • Face and eye detection on or Face detection on selected for Custom Setting a4 (Auto-area AF face/eye detection) in the CUSTOM SETTING MENU
    • • In very rare instances, the bottoms of pictures taken with all the following settings in effect would not appear as expected:
      • - Mode dial rotated to AUTO, P, or A
      • - An NEF (RAW) option selected for Image quality in the PHOTO SHOOTING MENU
      • 14-bit selected for NEF (RAW) recording > NEF (RAW) bit depth in the PHOTO SHOOTING MENU
      • Auto selected for Custom Setting d5 (Shutter type) in the CUSTOM SETTING MENU
      • Continuous H (extended) release mode selected with the release mode/self-timer button
Changes from “C” Firmware Version 1.01 to 2.00
  • • Added eye-detection AF for use when taking photographs. To enable eye-detection AF, select:
    • - AF-S or AF-C for Focus mode in the PHOTO SHOOTING MENU
    • - Auto-area AF for AF-area mode in the PHOTO SHOOTING MENU
    • - Face and eye detection on for Custom Setting a4 (Auto-area AF face/eye detection) in the CUSTOM SETTING MENU
    If the camera detects the face of a portrait subject, the face will be enclosed in an amber border indicating the focus point. If the subject’s eyes are detected, an amber border indicating the focus point will appear around either eye. If the camera detects more than one face or eye, triangles will appear to either side of the focus point; to position the focus point over a different face or eye, press the multi- or sub-selector left or right.
  • • Improved autofocus performance for photos and movies shot under low light: -3.5 – 19 EV (low light autofocus -6 – 19 EV), measured in photo mode with single-servo AF (AF-S) at ISO 100 and 20°C with an f/2 lens.
  • • The following improvements have been made to the Continuous H (extended) option for Release mode:
    • - Not only focus but now also exposure will respond to changes in the subject during shooting
    • - The burst shooting display after the memory buffer fills is now easier to read
  • • Reduced the length of time the display turns off (the blackout period) when pictures are taken with On or On (monitor only) selected for Image review in the PLAYBACK MENU.
  • • Item d5 in the CUSTOM SETTING MENU, formerly Electronic front-curtain shutter, has been renamed Shutter type and offers a choice of Auto, Mechanical shutter, and Electronic front-curtain shutter. If Auto is selected, the camera will automatically choose a shutter type according to shutter speed.
  • • Changed the color the focus point turns when the AF-ON button is pressed or the shutter-release button is pressed halfway with Auto-area AF selected and face detection or target tracking active.
  • • Edited and revised help text.
  • • Fixed the following issues:
    • - The camera would stop responding if certain operations were performed while HDMI output was in progress with 3840 x 2160 (4K UHD) selected for frame size.
    • - The value selected for maximum sensitivity would sometimes be exceeded during movie recording in mode M with On selected for Auto ISO control (mode M) if Active D-Lighting was enabled.
    • - The items in My Menu would sometimes not display correctly.
Changes from “C” Firmware Version 1.00 to 1.01
  • • When On is selected for HDMI > Advanced > N-Log setting in the SETUP MENU, Maximum sensitivity now takes effect during movie recording if:
    • - the camera is in mode P (programmed auto), S (shutter-priority auto), or A (aperture-priority auto), or
    • - the camera is in mode M (manual) and On is selected for ISO sensitivity settings > Auto ISO control (mode M) in the MOVIE SHOOTING MENU.
  • • Fixed an issue that resulted in third-party software showing an incorrect value for the Exif 35 mm format equivalent focal length field for photographs taken with a non-CPU lens connected via an FTZ mount adapter with the focal length specified using the Non-CPU lens data item in the SETUP MENU.
  • • Fixed an issue that resulted in photographs taken using optional flash units being overexposed if a face was detected in flash modes in which Auto-area AF would be selected for AF-area mode.
  • • Fixed an issue that resulted in an incorrect aperture being selected in mode P (programmed auto) with a flash mounted on the camera under conditions in which f/32 would normally be selected.
  • • Fixed an issue which prevented flash units controlled via radio Advanced Wireless Lighting syncing with shutter speeds of 1/100 s or faster with:
    • On selected for Flicker reduction shooting in the PHOTO SHOOTING MENU and
    • Enable selected for Custom Setting d5 (Electronic front-curtain shutter) in the CUSTOM SETTING MENU.
Viewing the Camera Firmware Version
  1. Turn the camera on.
  2. Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.
  3. Check the camera firmware version.
  4. Turn the camera off.
Product Description
Name Z 6 “C” Firmware Version 2.20
Supported cameras Z 6
Supported camera firmware versions “C” firmware versions 1.00–2.10
File name F-Z6-V220W.exe
System requirements
  • Microsoft Windows 10 Home
  • Microsoft Windows 10 Pro
  • Microsoft Windows 10 Enterprise
  • Microsoft Windows 8.1
  • Microsoft Windows 8.1 Pro
  • Microsoft Windows 8.1 Enterprise
  • Microsoft Windows 7 Home Basic
  • Microsoft Windows 7 Home Premium
  • Microsoft Windows 7 Professional
  • Microsoft Windows 7 Enterprise
  • Microsoft Windows 7 Ultimate
Note: XQD card reader required.
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Updating the Camera Firmware
  1. Create a folder on the computer hard disk and name it as desired.
  2. Download F-Z6-V220W.exe to the folder created in Step 1.
  3. Run F-Z6-V220W.exe to extract the following file to a folder named “Z6Update”:
    • Z_6_0220.bin (the camera firmware)
  4. Using an XQD card reader, copy “Z_6_0220.bin” to a memory card that has been formatted in the camera.
    Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
  5. Insert the memory card into the camera and turn the camera on.
  6. Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
  7. Once the update is complete, turn the camera off and remove the memory card.
  8. Confirm that the firmware has been updated to the new version.

Note: For detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
Z-series_FirmUp_Win_En.pdf (PDF) (0.30 MB)

Note: Updates can be performed for you by a Nikon-authorized service representative.

Product Description
Name Z 6 “C” Firmware Version 2.20
Supported cameras Z 6
Supported camera firmware versions “C” firmware versions 1.00–2.10
File name F-Z6-V220M.dmg
System requirements
  • macOS Catalina version 10.15
  • macOS Mojave version 10.14
  • macOS High Sierra version 10.13
  • macOS Sierra version 10.12
  • OS X 10.11.6
  • OS X 10.10.5
  • OS X 10.9.5
  • OS X 10.8.5
  • OS X 10.7.5
  • Mac OS X 10.6.8
Note: XQD card reader required.
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Updating the Camera Firmware
  1. Download F-Z6-V220M.dmg.
  2. Double-click the F-Z6-V220M.dmg icon to mount a disk image containing a folder named “Z6Update”, which in turn contains the following file:
    • Z_6_0220.bin (the camera firmware)
  3. Using an XQD card reader, copy “Z_6_0220.bin” to a memory card that has been formatted in the camera.
    Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
  4. Insert the memory card into the camera and turn the camera on.
  5. Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
  6. Once the update is complete, turn the camera off and remove the memory card.
  7. Confirm that the firmware has been updated to the new version.

Note: For detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
Z-series_FirmUp_Mac_En.pdf (PDF) (0.25 MB)

Note: Updates can be performed for you by a Nikon-authorized service representative.

BSD License (NVM Express Driver)

[ComponentName.c]
Copyright (c) 2013, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

[NvmExpress.c]
Copyright (c) 2013 - 2017, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

[NvmExpress.h]
(C) Copyright 2016 Hewlett Packard Enterprise Development LP
Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

[NvmExpressBlockIo.c]
Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

[NvmExpressBlockIo.h]
Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

[NvmExpressDiskInfo.c]
Copyright (c) 2013, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

[NvmExpressDiskInfo.h]
Copyright (c) 2013, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

[NvmExpressDxe.inf]
Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

[NvmExpressDxe.uni]
Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

[NvmExpressDxeExtra.uni]
Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

[NvmExpressHci.c]
Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

[NvmExpressHci.h]
(C) Copyright 2016 Hewlett Packard Enterprise Development LP
Copyright (c) 2013 - 2015, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

[NvmExpressPassthru.c]
(C) Copyright 2014 Hewlett-Packard Development Company, L.P.
Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

End User License Agreement

  • Download

    F-Z6-V220W.exe
    (Approx. 27.87 MB)

  • Download

    F-Z6-V220M.dmg
    (Approx. 33.00 MB)

PDF files can be viewed using free Adobe® Reader® software.
Download Adobe® Reader®.