English

Z 6 Firmware

Select your operating system.

  • Windows
  • Mac OS

This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.

  • • This service supplies software that can be used to update the Z 6 camera “C” firmware to version 2.00. Before proceeding, select Firmware version in the camera SETUP MENU and check the camera firmware version. You will not need to download or install this update if the firmware listed above is already installed.
  • • This update includes all changes made in previous updates.
  • • Performing this update requires an XQD card reader.
  • • Read the information below before proceeding.
Changes from “C” Firmware Version 1.01 to 2.00
  • • Added eye-detection AF for use when taking photographs. To enable eye-detection AF, select:
    • - AF-S or AF-C for Focus mode in the PHOTO SHOOTING MENU
    • - Auto-area AF for AF-area mode in the PHOTO SHOOTING MENU
    • - Face and eye detection on for Custom Setting a4 (Auto-area AF face/eye detection) in the CUSTOM SETTING MENU
    If the camera detects the face of a portrait subject, the face will be enclosed in an amber border indicating the focus point. If the subject’s eyes are detected, an amber border indicating the focus point will appear around either eye. If the camera detects more than one face or eye, triangles will appear to either side of the focus point; to position the focus point over a different face or eye, press the multi- or sub-selector left or right.
  • • Improved autofocus performance for photos and movies shot under low light: -3.5 – 19 EV (low light autofocus -6 – 19 EV), measured in photo mode with single-servo AF (AF-S) at ISO 100 and 20°C with an f/2 lens.
  • • The following improvements have been made to the Continuous H (extended) option for Release mode:
    • - Not only focus but now also exposure will respond to changes in the subject during shooting
    • - The burst shooting display after the memory buffer fills is now easier to read
  • • Reduced the length of time the display turns off (the blackout period) when pictures are taken with On or On (monitor only) selected for Image review in the PLAYBACK MENU.
  • • Item d5 in the CUSTOM SETTING MENU, formerly Electronic front-curtain shutter, has been renamed Shutter type and offers a choice of Auto, Mechanical shutter, and Electronic front-curtain shutter. If Auto is selected, the camera will automatically choose a shutter type according to shutter speed.
  • • Changed the color the focus point turns when the AF-ON button is pressed or the shutter-release button is pressed halfway with Auto-area AF selected and face detection or target tracking active.
  • • Edited and revised help text.
  • • Fixed the following issues:
    • - The camera would stop responding if certain operations were performed while HDMI output was in progress with 3840 x 2160 (4K UHD) selected for frame size.
    • - The value selected for maximum sensitivity would sometimes be exceeded during movie recording in mode M with On selected for Auto ISO control (mode M) if Active D-Lighting was enabled.
    • - The items in My Menu would sometimes not display correctly.
Changes from Previous Versions
Changes from “C” Firmware Version 1.00 to 1.01
  • • When On is selected for HDMI > Advanced > N-Log setting in the SETUP MENU, Maximum sensitivity now takes effect during movie recording if:
    • - the camera is in mode P (programmed auto), S (shutter-priority auto), or A (aperture-priority auto), or
    • - the camera is in mode M (manual) and On is selected for ISO sensitivity settings > Auto ISO control (mode M) in the MOVIE SHOOTING MENU.
  • • Fixed an issue that resulted in third-party software showing an incorrect value for the Exif 35 mm format equivalent focal length field for photographs taken with a non-CPU lens connected via an FTZ mount adapter with the focal length specified using the Non-CPU lens data item in the SETUP MENU.
  • • Fixed an issue that resulted in photographs taken using optional flash units being overexposed if a face was detected in flash modes in which Auto-area AF would be selected for AF-area mode.
  • • Fixed an issue that resulted in an incorrect aperture being selected in mode P (programmed auto) with a flash mounted on the camera under conditions in which f/32 would normally be selected.
  • • Fixed an issue which prevented flash units controlled via radio Advanced Wireless Lighting syncing with shutter speeds of 1/100 s or faster with:
    • On selected for Flicker reduction shooting in the PHOTO SHOOTING MENU and
    • Enable selected for Custom Setting d5 (Electronic front-curtain shutter) in the CUSTOM SETTING MENU.
Viewing the Camera Firmware Version
  1. Turn the camera on.
  2. Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.
  3. Check the camera firmware version.
  4. Turn the camera off.
Product Description
Name Z 6 “C” Firmware Version 2.00
Supported cameras Z 6
Supported camera firmware versions “C” firmware version 1.00–1.01
File name F-Z6-V200W.exe
System requirements
  • Microsoft Windows 10 Home
  • Microsoft Windows 10 Pro
  • Microsoft Windows 10 Enterprise
  • Microsoft Windows 8.1
  • Microsoft Windows 8.1 Pro
  • Microsoft Windows 8.1 Enterprise
  • Microsoft Windows 7 Home Basic
  • Microsoft Windows 7 Home Premium
  • Microsoft Windows 7 Professional
  • Microsoft Windows 7 Enterprise
  • Microsoft Windows 7 Ultimate
Note: XQD card reader required.
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Updating the Camera Firmware
  1. Create a folder on the computer hard disk and name it as desired.
  2. Download F-Z6-V200W.exe to the folder created in Step 1.
  3. Run F-Z6-V200W.exe to extract the following file to a folder named “Z6Update”:
    • Z_6_0200.bin (the camera firmware)
  4. Using an XQD card reader, copy “Z_6_0200.bin” to a memory card that has been formatted in the camera.
    Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
  5. Insert the memory card into the camera and turn the camera on.
  6. Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
  7. Once the update is complete, turn the camera off and remove the memory card.
  8. Confirm that the firmware has been updated to the new version.

Note: For detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
Z-series_FirmUp_Win_En.pdf (PDF) (0.30 MB)

Note: Updates can be performed for you by a Nikon-authorized service representative.

Product Description
Name Z 6 “C” Firmware Version 2.00
Supported cameras Z 6
Supported camera firmware versions “C” firmware version 1.00–1.01
File name F-Z6-V200M.dmg
System requirements
  • macOS Mojave version 10.14
  • macOS High Sierra version 10.13
  • macOS Sierra version 10.12
  • OS X 10.11.6
  • OS X 10.10.5
  • OS X 10.9.5
  • OS X 10.8.5
  • OS X 10.7.5
  • Mac OS X 10.6.8
Note: XQD card reader required.
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Updating the Camera Firmware
  1. Download F-Z6-V200M.dmg.
  2. Double-click the F-Z6-V200M.dmg icon to mount a disk image containing a folder named “Z6Update”, which in turn contains the following file:
    • Z_6_0200.bin (the camera firmware)
  3. Using an XQD card reader, copy “Z_6_0200.bin” to a memory card that has been formatted in the camera.
    Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
  4. Insert the memory card into the camera and turn the camera on.
  5. Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
  6. Once the update is complete, turn the camera off and remove the memory card.
  7. Confirm that the firmware has been updated to the new version.

Note: For detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
Z-series_FirmUp_Mac_En.pdf (PDF) (0.25 MB)

Note: Updates can be performed for you by a Nikon-authorized service representative.

End User License Agreement

  • Download

    F-Z6-V200M.dmg
    (Approx. 32.92 MB)

  • Download

    F-Z6-V200W.exe
    (Approx. 27.82 MB)

This download service is not available on your device.

You can send yourself an e-mail with a link to this download for use on another device.

PDF files can be viewed using free Adobe® Reader® software.
Download Adobe® Reader®.

Download Center