English

Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.

COOLPIX L110 Firmware

Select your operating system.

  • Windows
  • Mac OS

This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.

About this firmware update

This service provides the software for upgrading the COOLPIX L110 firmware to v1.4.

The following improvements have been made in version 1.4.

-  An issue that sometimes caused pictures taken under incandescent coloured fluorescent lighting with White balance set to Auto to have a yellowish cast has been resolved.



How to confirm your cameras current firmware version

If the latest firmware version is already installed on your L110, you need not proceed with download or installation of this Firmware Upgrade. The current firmware version can be verified from the Firmware version item in the camera's setup menu.

1. Turn on the camera.
2. Press the MENU button to display the menu screen.  
3. Select the Setup Menu.  
4. Select Firmware version from the setup menu.
5. The camera's firmware version will be displayed.  
6. Turn off the camera.



Quick guide for download and installing this firmware update
Please note that when firmware is updated on the camera any images stored on the internal memory are erased.  Please ensure that any images on the camera are copied to a computer or memory card before proceding with this update.

Power the camera from AC adapter unit or use a fully charged battery.

1. Create a new folder on your computer's hard drive.
2. Click the link at the bottom of this page to download the .EXE file to the new folder created.
3. Run the .EXE file from the Windows Explorer to create a folder which contains a folder called 'firmware' 
4. Use a card reader or similar device to copy the 'firmware' folder to a formatted SD memory card.    
5. Insert the memory card containing the 'firmware' folder into the camera and turn on the camera.
6. Select Firmware version from the camera's setup menu and follow instructions displayed to upgrade the firmware.    
7. After the upgrade is complete, turn the camera off and remove the memory card.
8. Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded. 

For detailed instructions on how to install this firmware update click here



System requirements

System requirements

5MB or more free hard-disk space. 32MB or more free RAM. Built-in USB port.
Microsoft Windows 7 (all editions)
Microsoft Windows Vista (all editions)
Microsoft Windows XP Professional
Microsoft Windows XP Home Edition
Microsoft Windows 2000 Professional
Microsoft Windows ME
Microsoft Windows 98 Second Edition (SE)
*SD Card reader or computer with built-in SD memory card slot required.

Download fileF-L110-V14W.exe (3.57 MB)
Contains the following file: firmware.bin


About this firmware update

This service provides the software for upgrading the COOLPIX L110 firmware to v1.4.

The following improvements have been made in version 1.4.

-   An issue that sometimes caused pictures taken under incandescent coloured fluorescent lighting with White balance set to Auto to have a yellowish cast has been resolved.


How to confirm your cameras current firmware version

If the latest firmware version is already installed on your L110, you need not proceed with download or installation of this Firmware Upgrade. The current firmware version can be verified from the Firmware version item in the camera's setup menu.

1. Turn on the camera.
2. Press the MENU button to display the menu screen.  
3. Select the Setup Menu.  
4. Select Firmware version from the setup menu.
5. The camera's firmware version will be displayed.  
6. Turn off the camera.



Quick guide for download and installing this firmware update
Please note that when firmware is updated on the camera any images stored on the internal memory are erased.  Please ensure that any images on the camera are copied to a computer or memory card before proceding with this update.

Power the camera from AC adapter unit or use a fully charged battery.

1. Click the link at the bottom of this page to download the .DMG file which contains the firmware.
2. Double-click the .DMG file to display a folder which contains a folder called 'firmware'.
3. Use a card reader or similar device to copy the 'firmware' folder to a formatted SD memory card.    
4. Insert the memory card containing the 'firmware' folder into the camera and turn on the camera.
5. Select Firmware version from the camera's setup menu and follow instructions displayed to upgrade the firmware.    
6. After the upgrade is complete, turn the camera off and remove the memory card.
7. Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded. 

For detailed instructions on how to install this firmware update click here.       



System requirements


System requirementsMac OSX 10.1.5 - 10.6.3
1-GHz or better PowerPC G4 / PowerPC G5 / Intel Core series / Xeon series

5 MB or more free hard-disk space.

32 MB or more free RAM. Built-in USB port.

*SD Card reader or computer with built-in SD memory card slot required.
Download fileF-L110-V14M.dmg (18.01 MB)
Contains the following file: firmware.bin

 


End User License Agreement

  • Download

    F-L110-V14W.exe
    (Approx. 3.57 MB)

  • Download

    F-L110-V14M.dmg
    (Approx. 18.01 MB)

PDF files can be viewed using free Adobe® Reader® software.
Download Adobe® Reader®.