English

Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.

D810A Firmware

Select your operating system.

  • Windows
  • Mac OS

This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.

  • • This service supplies software that can be used to update the D810A camera “C” firmware to version 1.03. Before proceeding, select Firmware version in the camera SETUP MENU and check the camera firmware version. You will not need to download or install this update if the firmware listed above is already installed.
  • • Read the information below before proceeding.
Changes from “C” Firmware Version 1.02 to 1.03
  • • Added the following supports for AF-P lenses:
    • - If the standby timer expires after focusing, the focus position will no longer change when the timer is reactivated.
    • - When focus is adjusted by rotating the lens focus ring, the focus indicator in the viewfinder (and in live view, the focus point in the monitor) now flash to indicate when infinity or the minimum focus distance is reached.
  • • Fixed the following issues:
    • - Microphone sensitivity would sometimes not be correctly adjusted when movies were recorded with Auto sensitivity selected for Microphone sensitivity.
    • - The camera would sometimes stop responding during multiple exposure shooting.
Changes from Previous Versions
Changes from “C” Firmware Version 1.01 to 1.02
  • • The WT-7 wireless transmitter is now supported.
  • • Fixed the following issues:
    • - Multiple exposures were not recorded correctly.
    • - If On was selected for Auto distortion control, distortion would appear at the edges of photos taken with NEF (RAW) + JPEG fine selected for Image quality and Medium selected for JPEG/TIFF recording > Image size.
    • - Photos taken immediately after lenses were exchanged would not be recorded at the correct exposure.
    • - The protect icon did not display correctly.
    • - If On was selected for Auto distortion control, the camera would stop responding when the user attempted to take pictures with NEF (RAW) + JPEG fine selected for Image quality, Small selected for NEF (RAW) recording > Image size, and RAW primary - JPEG secondary selected for Secondary slot function.
    • - Shutter speeds for the electronic front-curtain shutter would sometimes be faster than 1/2000 s.
    • - Pictures would sometimes not be recorded.
Changes from “C” Firmware Version 1.00 to 1.01
  • • Fixed an issue that sometimes caused the camera to stop responding when attached to a WR‑R10 wireless remote controller running firmware version 3.00.
Viewing the Camera Firmware Version
  1. Turn the camera on.
  2. Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.
  3. Check the camera firmware version.
  4. Turn the camera off.
Product Description
Name D810A “C” Firmware Version 1.03
Supported cameras D810A
Supported camera firmware versions “C” firmware versions 1.00–1.02
File name F-D810A-V103W.exe
System requirements
  • Microsoft Windows 10 Home
  • Microsoft Windows 10 Pro
  • Microsoft Windows 10 Enterprise
  • Microsoft Windows 8.1
  • Microsoft Windows 8.1 Pro
  • Microsoft Windows 8.1 Enterprise
  • Microsoft Windows 7 Home Basic
  • Microsoft Windows 7 Home Premium
  • Microsoft Windows 7 Professional
  • Microsoft Windows 7 Enterprise
  • Microsoft Windows 7 Ultimate
Note: Card reader or computer with built-in memory-card slot required.
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Updating the Camera Firmware
  1. Create a folder on the computer hard disk and name it as desired.
  2. Download F-D810A-V103W.exe to the folder created in Step 1.
  3. Run F-D810A-V103W.exe to extract the following file to a folder named “D810AUpdate”:
    • D810A_0103.bin (the camera firmware)
  4. Using a card slot or card reader, copy “D810A_0103.bin” to a memory card that has been formatted in the camera.
  5. Insert the memory card into the camera slot currently selected as the primary slot and turn the camera on.
  6. Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
  7. Once the update is complete, turn the camera off and remove the memory card.
  8. Confirm that the firmware has been updated to the new version.

Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
DSLR_Firmup_Win_En.pdf (PDF) (0.21 MB)

Note: Updates can be performed for you by a Nikon-authorized service representative.
Product Description
Name D810A “C” Firmware Version 1.03
Supported cameras D810A
Supported camera firmware versions “C” firmware versions 1.00–1.02
File name F-D810A-V103M.dmg
System requirements
  • macOS High Sierra version 10.13
  • macOS Sierra version 10.12
  • OS X 10.11.6
  • OS X 10.10.5
  • OS X 10.9.5
  • OS X 10.8.5
  • OS X 10.7.5
  • Mac OS X 10.6.8
Note: Card reader or computer with built-in memory-card slot required.
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Updating the Camera Firmware
  1. Download F-D810A-V103M.dmg.
  2. Double-click the F-D810A-V103M.dmg icon to mount a disk image containing a folder named “D810AUpdate”, which in turn contains the following file:
    • D810A_0103.bin (the camera firmware)
  3. Using a card slot or card reader, copy “D810A_0103.bin” to a memory card that has been formatted in the camera.
  4. Insert the memory card into the camera slot currently selected as the primary slot and turn the camera on.
  5. Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
  6. Once the update is complete, turn the camera off and remove the memory card.
  7. Confirm that the firmware has been updated to the new version.

Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
DSLR_Firmup_Mac_En.pdf (PDF) (0.17 MB)

Note: Updates can be performed for you by a Nikon-authorized service representative.

End User License Agreement

  • Download

    F-D810A-V103W.exe
    (Approx. 17.29 MB)

  • Download

    F-D810A-V103M.dmg
    (Approx. 19.08 MB)

Back

PDF files can be viewed using free Adobe® Reader® software.
Download Adobe® Reader®.

Return to top