- Download Center
- D40 Firmware
Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.
Select your operating system.
This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.
About this firmware update
This download provides software for upgrading D40
A
firmware to v
1.11 and
B
firmware to v1.11
. When performing this Firmware Upgrade, be sure to upgrade both A and B firmware. Be aware that operation of your D40 is not guaranteed if either A or B firmware is upgraded to v1.11 while the other firmware is not upgraded.
The following issue has been resolved in version 1.11.
S
hooting times were not always accurately recorded within the image data for images captured in bursts of continuous shooting.
How to confirm your cameras current firmware version
If the latest firmware versions are already installed on your D40, you need not proceed with download or installation of this Firmware Upgrade. Current firmware versions can be verified from the Firmware version item in the camera's setup menu.
1.Turn the D40 on.
2. Press the MENU button and select Firmware version from the setup menu. The camera's firmware version will be displayed.
3. Turn the D40 off.
Quick guide for download and installing this firmware update
Power the camera from AC adapter unit or use a fully charged battery.
1. Download the firmware file from the link below.
2. Turn the camera on, press the "Menu" button, select the SETUP menu and then select "CSM/Setup menu". Select the "Full" menu option and press OK.
3. Format an approved memory card in the camera.
4. Connect D40 to computer (in MSC Mass Storage USB mode) or use a SD Card Reader.
5. Copy only one of the downloaded files "
AD400111.bin" (A firmware) or "
BD400111.bin" (B firmware) to the top level of the memory card.
Do
not copy both files to the card at the same time.
6.
Disconnect
the camera from the computer (if using an SD card reader then insert the memory card to the camera)
7. Turn the camera on, press the "Menu" button, select the SETUP menu and then select "Firmware Ver".
8. Select "Version Up" and follow the camera's on-screen menus.
Do not turn the camera off during upgrade.
9. When a message displays that the upgrade is complete, turn the camera off.
10. Repeat steps 3 - 9, to perform the second firmware update.
11. Re-format the memory card.
For detailed instructions on how to install this firmware update click here
System requirements
|
System requirements |
5MB or more free hard-disk space. 32MB or more free RAM. Built-in USB port. |
|
Download file |
d40v111en.exe (1.38 MB) |
About this firmware update
This service provides software for upgrading D40
A
firmware to v
1.11 and
B
firmware to v1.11. When performing this Firmware Upgrade, be sure to upgrade both A and B firmware. Be aware that operation of your D40 is not guaranteed if either A or B firmware is upgraded to v1.10 while the other firmware is not upgraded.
The following issue has been resolved in version 1.11.
Shooting times were not always accurately recorded within the image data for images captured in bursts of continuous shooting.
How to confirm your cameras current firmware version
If the latest firmware versions are already installed on your D40, you need not proceed with download or installation of this Firmware Upgrade. Current firmware versions can be verified from the Firmware version item in the camera's setup menu.
1. Turn the camera on.
2. Press the MENU button and select Firmware version from the setupmenu. The camera's firmware version will be displayed.
3. Turn the camera off.
Quick guide for download and installing this firmware update
Power the camera from AC adapter unit or use a fully charged battery.
1. Download the firmware file from the link below.
2. Turn the camera on, press the "Menu" button, select the SETUP menu and then select "CSM/Setup menu". Select the "Full" menu option and press OK.
3. Format an approved memory card in the camera.
4. Connect D40 to computer (in MSC Mass Storage USB mode) or use a SD Card Reader.
5. Copy only one of the downloaded files "
AD400111.bin" (A firmware) or
"
BD400111.bin" (B firmware) to the
top level
of the memory card.
Do
not copy both files to the card at the same time.
6.
Disconnect
the camera from the computer (if using an SD card reader then insert the memory card to the camera)
7. Turn the camera on, press the "Menu" button, select the SETUP menu and then select "Firmware Ver".
8. Select "Version Up" and follow the camera's on-screen menus.
Do not turn the camera off during upgrade.
9. When a message displays that the upgrade is complete, turn the camera off.
10. Repeat steps 3 - 9, to perform the second firmware update.
11. Re-format the memory card.
For more detailed instructions on how to install this firmware update click here
System requirements
|
System requirements |
Operating System: Mac OS v9.0.4-9.2.2 / Mac OS X v10.1.5-10.4 |
|
Download file |
d40v111en.sit.hqx (1.93 MB) |
PDF files can be viewed using free Adobe® Reader® software.
Download Adobe® Reader®.