English

Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.

WR-R10 Firmware (see note regarding version 3.00)

Select your operating system.

  • Windows
  • Mac OS

This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.

IMPORTANT Note Regarding Version 3.00

Customers wishing to upgrade to firmware version 3.00, which offers support for Advanced Wireless Lighting (AWL), can request this service free of charge from a Nikon service facility. More details are available here ( for customers in Asia, Oceania, the Middle East, and Africa, for customers in Europe, for customers in the Americas ).

Download started on March 13, 2013.

  • • This service supplies software that can be used to update the firmware for the WR-R10 to version 2.00. You will not need to download or install this update if the firmware listed above is already installed.
  • • Connect the wireless remote controller to the camera before viewing the firmware version number or updating the firmware for the WR-R10. For information on supported cameras, see “Cameras That Can Be Used to View and Update the Firmware for the WR-R10,” below.
  • • Read the information below before proceeding.
Cameras That Can Be Used to View and Update the Firmware for the WR-R10

The following cameras can be used to view the version number and update the firmware for the WR-R10:

  • • Z 9 (*), Z 8 (*), Z 7II, Z 6II, Z 7, Z 6, Z 5
  • • D6 (*), D5 (*), D4S (*), D4 (*), Df, D850 (*), D810A (*), D810 (*), D800 (*), 800E (*), D750, D500 (*), D7500, D7200, D7100
    * Requires a WR-A10 WR Adapter.
    • - Update the camera firmware to the latest version before proceeding.
    • - Other cameras cannot be used.
    • - Firmware updates can also be performed by Nikon-authorized service representatives.

Last updated November 15, 2023.

Changes from Firmware Version 1.00 to 2.00
  • • Camera settings can now be viewed and changed using the WR-1 when the WR-1 is used as a transmitter and the WR-R10 is connected to a D7100 for use as a receiver.
  • • Support for the Release Hold Time function built into the WR-1 is now supported when the WR-1 is used as a transmitter and the WR-R10 is used as a receiver.
  • • To make remote operation using the WR-1 function that allows for division of multiple units into groups (A, B, C, D) more convenient, the group specified with the WR-R10 is now fixed at group A rather than all groups (A, B, C, D) with transmission. With reception, the group is fixed at group A with firmware versions 1.00 and 2.00.
Viewing the WR-R10 Firmware Version
    1. Connect the WR-R10 to the camera.
    2. Turn the camera on.
    3. Press the camera MENU button and select [Firmware version] in the [SETUP MENU].
    4. Check the WR-R10 firmware version (“W”).
    5. Turn the camera off.
Product Description
Name WR-R10 Firmware Version 2.00
Supported devices WR-R10 wireless remote controllers
Supported firmware versions Version 1.00
File name F-WRR10-V200W.exe
System requirements
  • Microsoft Windows 8 (all editions)
  • Microsoft Windows 7 (all editions)
  • Microsoft Windows Vista (all editions)
  • Microsoft Windows XP Professional
  • Microsoft Windows XP Home Edition
  • Microsoft Windows 2000 Professional
  • Microsoft Windows Me
  • Microsoft Windows 98SE
Note: Card reader and computer required.
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Updating the Firmware
  1. Create a folder on the computer hard disk and name it as desired.
  2. Download F-WRR10-V200W.exe to the folder created in Step 1.
  3. Run F-WRR10-V200W.exe to extract the following file to a folder named “WRR10Update”:
    • WRR10_0200.bin (the firmware)
  4. Using a card slot or card reader, copy “WRR10_0200.bin” to a memory card that has been formatted in the camera.
    Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
  5. Insert the memory card into the camera.

    • If the camera has two memory card slots, check whether it allows you to choose primary and secondary slots:

    • - If it does not, insert the card into Slot 1.
    • - If it does, insert the card into the primary slot.
  6. Connect the WR-R10 to the camera.
  7. Turn the camera on.
  8. Press the camera MENU button to display the menus.
  9. Select [Firmware version] in the [SETUP MENU] and follow the on-screen instructions to complete the firmware update.
  10. Once the update is complete, turn the camera off and remove the memory card.
  11. Confirm that the firmware has been updated to the new version.

Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
WR-R_FirmUp_Win_En.pdf (pdf) (0.24 MB)

Note: Updates can be performed for you by a Nikon-authorized service representative.
Product Description
Name WR-R10 Firmware Version 2.00
Supported devices WR-R10 wireless remote controllers
Supported firmware versions Version 1.00
File name F-WRR10-V200M.dmg
System requirements Mac OS X version 10.1.5 - 10.8.2
Note: Card reader and computer required.
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Updating the Firmware
    1. Download F-WRR10-V200M.dmg.
    2. Double-click the F-WRR10-V200M.dmg icon to mount a disk image containing a folder named “WRR10Update”, which in turn contains the following file:
      • WRR10_0200.bin (the firmware)
    3. Using a card slot or card reader, copy “WRR10_0200.bin” to a memory card that has been formatted in the camera.
      Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
    4. Insert the memory card into the camera.

      • If the camera has two memory card slots, check whether it allows you to choose primary and secondary slots:

      • - If it does not, insert the card into Slot 1.
      • - If it does, insert the card into the primary slot.
    5. Connect the WR-R10 to the camera.
    6. Turn the camera on.
    7. Press the camera MENU button to display the menus.
    8. Select [Firmware version] in the [SETUP MENU] and follow the on-screen instructions to complete the firmware update.
    9. Once the update is complete, turn the camera off and remove the memory card.
    10. Confirm that the firmware has been updated to the new version.

Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
WR-R_FirmUp_Mac_En.pdf (pdf) (0.21 MB)

Note: Updates can be performed for you by a Nikon-authorized service representative.

End User License Agreement

  • Download

    F-WRR10-V200M.dmg
    (Approx. 104.90 KB)

  • Download

    F-WRR10-V200W.exe
    (Approx. 125.98 KB)

Back

PDF files can be viewed using free Adobe® Reader® software.
Download Adobe® Reader®.

Return to top