- Download-Center
- D200-Firmware
Obwohl Ihr Gerät nicht diesen Download-Service unterstützt, kann es zum Anzeigen von Download-Informationen genutzt werden. Via E-Mail lassen sich Download-Links für das Herunterladen auf einem Computer versenden.
Wählen Sie Ihr Betriebssystem.
Dieses Software-Updateprogramm ist für das oben aufgeführte Kundenprodukt (das »betroffene Produkt«) und wird nur nach Annahme der unten aufgeführten Vereinbarung bereitgestellt. Mit der Wahl von »Annehmen« und durch Anklicken von »Download« haben Sie die Geschäftsbedingungen der Vereinbarung akzeptiert. Vergewissern Sie sich, dass Sie die Bedingungen der Vereinbarung verstanden haben, bevor Sie mit dem Download beginnen.
About this firmware update
This service provides software for upgrading D200 A and B firmware to Ver 2.01. When performing this firmware upgrade, be sure to upgrade both A and B firmware. Correct operation of your camera is not guaranteed if only A or B of the firmware is upgraded without upgrading the other part.
This firmware resolves an issue which, in rare cases, causes the battery indicator to blink whilst shooting regardless of the level of charge in the battery.
How to confirm your cameras current firmware version
If the latest firmware versions are already installed on your D200, you need not proceed with download or installation of this Firmware Upgrade. Current firmware versions can be verified from the Firmware version item in the camera's setup menu.
1.Turn the camera on.
2. Press the MENU button and select Firmware version from the setup menu. The camera's firmware version will be displayed.
3. Turn the camera off.
Quick guide for download and installing this firmware update
Power the camera from AC adapter unit or use a fully charged battery.
1. Download the software from the link below and extract the firmware file "A2000201.bin" (A firmware) or "B2000201.bin" (B firmware).
2. Format an approved memory card in the camera.
3. Connect the camera to the computer (in MSC Mass Storage USB mode) or use a memory card reader.
4. Copy only of the firmware files "A2000201.bin" (A firmware) or "B2000201.bin" (B firmware) to the
top level
of the memory card.
Do not copy both files to the card at the same time.
5.
Disconnect
the camera from the computer (if using an memory card reader then insert the memory card to the camera)
6. Turn the camera on, press the "Menu" button, select the SETUP menu and then select "Firmware Ver".
7. Select "Update" and follow the camera's on-screen menus.
Do not turn the camera off during upgrade.
8. When a message displays that the upgrade is complete, turn the camera off.
9. Repeat steps 2 - 8 to perform the second firmware update.
10. Re-format the memory card.
11. Turn the camera on again to confirm that A and B firmware has successfully been updated to v2.01.
For detailed instructions on how to install this firmware update click here
System requirements
|
System requirements |
5MB or more free hard-disk space. 32MB or more free RAM. Built-in USB port. |
|
Download file |
F-D200-V201W.exe (1.08 MB) |
About this firmware update
This service provides software for upgrading D200 A and B firmware to Ver 2.01. When performing this firmware upgrade, be sure to upgrade both A and B firmware Correct operation of your camera is not guaranteed if only A or B of the firmware is upgraded without upgrading the other part.
This firmware resolves an issue which, in rare cases, causes the battery indicator to blink whilst shooting regardless of the level of charge in the battery.
How to confirm your cameras current firmware version
If the latest firmware versions are already installed on your D200, you need not proceed with download or installation of this Firmware Upgrade. Current firmware versions can be verified from the Firmware version item in the camera's setup menu.
1.Turn the camera on.
2. Press the MENU button and select Firmware version from the setup menu. The camera's firmware version will be displayed.
3. Turn the camera off.
Quick guide for download and installing this firmware update
Power the camera from AC adapter unit or use a fully charged battery.
1. Download the software from the link below and extract the firmware file "A2000201.bin" (A firmware) or"B2000201.bin" (B firmware).
2. Format an approved memory card in the camera.
3. Connect the camera to the computer (in MSC Mass Storage USB mode) or use a memory card reader.
4. Copy only of the firmware files "A2000201.bin" (A firmware) or "B2000201.bin" (B firmware) to the
top level
of the memory card.
Do not copy both files to the card at the same time.
5.
Disconnect
the camera from the computer (if using an memory card reader then insert the memory card to the camera)
6. Turn the camera on, press the "Menu" button, select the SETUP menu and then select "Firmware Ver".
7. Select "Update" and follow the camera's on-screen menus.
Do not turn the camera off during upgrade.
8. When a message displays that the upgrade is complete, turn the camera off.
9. Repeat steps 2 - 8 to perform the second firmware update.
10. Re-format the memory card.
11. Turn the camera on again to confirm that A and B firmware has successfully been updated to v2.01.
For detailed instructions on how to install this firmware update click here
System requirements
|
System requirements |
Power PC G3 or better. |
|
Download file |
F-D200-V201M.sit (4.0 MB) |
PDF-Dateien können mit der kostenlosen Adobe® Reader®-Software angezeigt werden.
Laden Sie den Adobe® Reader® herunter.