English

Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.

Camera Control Pro 2

Select your operating system.

  • Windows
  • Mac OS

This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.

Notices

  • • This software is for current owners of Camera Control Pro 2. For new users, it functions as a trial version that, once installed, can be used for up to 30 days before purchase is required.
  • • This software is distributed as a file named “S-CCPRO_-022301WF-ALLIN-ALL___.exe”. Download and run the file to perform the update.
  • • When performing the update, you may be required to enter the product key to confirm ownership.
  • • Before beginning installation, exit Camera Control Pro 2 and all other applications, including any anti-virus software.
  • • When performing the update, log in to an account with administrator privileges.
  • • The interface after the update will be in the same language as the current software and cannot be changed.
  • • Camera Control Pro may not display correctly at screen resolutions over 1920 × 1080. This can be resolved by choosing a resolution of 1920 × 1080 or lower.
  • • Users of the D5500 (firmware C version 1.01 or later) or the D5300 (firmware C version 1.01 or later) who use the Windows edition of Camera Control Pro 2 are requested to upgrade to the current version, as versions 2.22.0 or earlier will no longer detect the camera.
  • • Read the information below before proceeding.
Product Description
Name Camera Control Pro 2 Version 2.23.1
File name S-CCPRO_-022301WF-ALLIN-ALL___.exe
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Supported cameras
  • D5, D4S, D4, D3X, D3S, D3
  • Df, D810, D810A, D800, D800E, D750, D700, D610, D600
  • D500, D300S, D300, D7200, D7100, D7000, D5500, D5300, D5200, D5100, D5000
  • D90, D60, Nikon 1 V3 (“C” firmware version 1.10 or later)
System requirements
Operating system
  • Microsoft Windows 10 Home
  • Microsoft Windows 10 Pro
  • Microsoft Windows 10 Enterprise
  • Microsoft Windows 8.1
  • Microsoft Windows 8.1 Pro
  • Microsoft Windows 8.1 Enterprise
  • Microsoft Windows 7 Home Basic Service Pack 1
  • Microsoft Windows 7 Home Premium Service Pack 1
  • Microsoft Windows 7 Professional Service Pack 1
  • Microsoft Windows 7 Enterprise Service Pack 1
  • Microsoft Windows 7 Ultimate Service Pack 1
Note: Pre-installed versions only. 64- and 32-bit editions supported; software runs as a native 64-bit application under 64-bit editions of Windows.
CPU Intel Celeron, Pentium 4, or Core series, 1 GHz or better
RAM 1 GB or more (1.5 GB or more recommended)
Hard-disk space A minimum of 500 MB available on the start-up disk (1 GB or more recommended)
Monitor
  • Resolution: 1024 × 768 pixels (XGA) or more
  • Colors: 24-bit color (True Color) or more
Interface Built-in USB port required. May not function as expected if camera is connected via a USB hub.
Notices
  • • To users of cameras other than the D3, D700, D300S, D300, D5000, D90, and D60: The Explorer, Nikon Transfer 2, and other software will not show the pictures stored on memory cards inserted in the camera. The pictures will be displayed when you exit Camera Control Pro 2.
  • • Using AF-F with D4, D800, D800E, D610, D600, D7100, D7000, D5500, D5300, D5200, D5100, and Df cameras: The focus point will not be recorded in the photo information for pictures taken using the Shoot button while AF-F is selected for autofocus mode. Except in the case of the D5200, the focus point will be recorded with pictures taken using the AF and Shoot button, but note that pictures cannot be taken using the AF and Shoot button when AF-F is selected with the D7000.
Changes from Version 2.23.0 to 2.23.1
  • • Added support for D5 firmware C version 1.10, including the following features:
    • - Dynamic-area AF (9 points)
    • - Electronic VR
    • - Flicker reduction
    • - Movies with files sizes over 4 GB
Installation
  1. Create a folder on the hard disk and name it as desired.
  2. Download S-CCPRO_-022301WF-ALLIN-ALL___.exe to the folder created in Step 1.
  3. Run S-CCPRO_-022301WF-ALLIN-ALL___.exe to launch the installer.
  4. Follow the on-screen instructions to complete installation.

Notices

  • • This software is for current owners of Camera Control Pro 2. For new users, it functions as a trial version that, once installed, can be used for up to 30 days before purchase is required.
  • • This software is distributed as a file named “S-CCPRO_-022301MF-ALLIN-64BIT_.dmg”. Download and run the file to perform the update.
  • • When performing the update, you may be required to enter the product key to confirm ownership.
  • • Before beginning installation, exit Camera Control Pro 2 and all other applications, including any anti-virus software.
  • • When performing the update, you will be prompted for the administrator password.
  • • The interface after the update will be in the same language as the current software and cannot be changed.
  • • Camera Control Pro may not display correctly at screen resolutions over 1920 × 1080. This can be resolved by choosing a resolution of 1920 × 1080 or lower.
  • • This update may result in Wireless Transmitter Utility versions 1.5.6 or earlier being unable to detect the camera in some versions of OS X. Users of the Wireless Transmitter Utility should install version 1.6.0 or later.
  • • Read the information below before proceeding.
Product Description
Name Camera Control Pro 2 Version 2.23.1
File name S-CCPRO_-022301MF-ALLIN-64BIT_.dmg
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Supported cameras
  • D5, D4S, D4, D3X, D3S, D3
  • Df, D810, D810A, D800, D800E, D750, D700, D610, D600
  • D500, D300S, D300, D7200, D7100, D7000, D5500, D5300, D5200, D5100, D5000
  • D90, D60, Nikon 1 V3 (“C” firmware version 1.10 or later)
System requirements
Operating system
  • OS X 10.11.5
  • OS X 10.10.5
  • OS X 10.9.5
CPU Intel Core or Xeon series, 1 GHz or better
RAM 2 GB or more
Hard-disk space A minimum of 500 MB available on the start-up disk (1 GB or more recommended)
Monitor
  • Resolution: 1024 × 768 pixels (XGA) or more
  • Colors: 24-bit color (millions of colors) or more
Interface Built-in USB port required. May not function as expected if camera is connected via a USB hub.
Notices
  • • To users of cameras other than the D3, D700, D300S, D300, D5000, D90, and D60: Image Capture, iPhoto, Nikon Transfer 2, and other software will not show the pictures stored on memory cards inserted in the camera. The pictures will be displayed when you quit Camera Control Pro 2.
  • • Using AF-F with D4, D800, D800E, D610, D600, D7100, D7000, D5500, D5300, D5200, D5100, and Df cameras: The focus point will not be recorded in the photo information for pictures taken using the Shoot button while AF-F is selected for autofocus mode. Except in the case of the D5200, the focus point will be recorded with pictures taken using the AF and Shoot button, but note that pictures cannot be taken using the AF and Shoot button when AF-F is selected with the D7000.
  • • If Camera Control Pro 2 is launched immediately after you have connected a camera containing a memory card with a large number of images (a few hundred or more), the computer may fail to detect the camera or the camera may be slow to respond. Do not launch Camera Control Pro 2 while the memory card access lamp is lit.
  • • If you connect the camera to a LAN in camera control mode under Mac OS X 10.11, the Image Capture application supplied with Mac OS will list the camera under “SHARED”. Do not select the camera in the “SHARED” list, as this will prevent the camera being detected by Camera Control Pro 2.
Changes from Version 2.23.0 to 2.23.1
  • • Added support for D5 firmware C version 1.10, including the following features:
    • - Dynamic-area AF (9 points)
    • - Electronic VR
    • - Flicker reduction
    • - Movies with files sizes over 4 GB
Installation
  1. Download S-CCPRO_-022301MF-ALLIN-64BIT_.dmg.
  2. Double-click the downloaded file to mount a “Camera Control Pro 2” disk image containing a “Welcome” file.
  3. Double-click the “Welcome” file to launch the installer.
  4. Follow the on-screen instructions to complete installation.
User's Manual

 Download (2.88 MB) (PDF)

Agreement

  • Download
  • Download

    S-CCPRO_-022301WF-ALLIN-ALL___.exe
    (Approx. 154.89 MB)

  • Download

    S-CCPRO_-022301WF-ALLIN-ALL___.exe
    (Approx. 154.89 MB)

  • Download

    S-CCPRO_-022301WF-ALLIN-ALL___.exe
    (Approx. 154.89 MB)

  • Download

    S-CCPRO_-022301WF-ALLIN-ALL___.exe
    (Approx. 154.89 MB)

  • Download

    S-CCPRO_-022301WF-ALLIN-ALL___.exe
    (Approx. 154.89 MB)

  • Download
  • Download

    S-CCPRO_-022301MF-ALLIN-64BIT_.dmg
    (Approx. 56.38 MB)

  • Download

    S-CCPRO_-022301MF-ALLIN-64BIT_.dmg
    (Approx. 56.38 MB)

  • Download

    S-CCPRO_-022301MF-ALLIN-64BIT_.dmg
    (Approx. 56.38 MB)

  • Download

    S-CCPRO_-022301MF-ALLIN-64BIT_.dmg
    (Approx. 56.38 MB)

  • Download

    S-CCPRO_-022301MF-ALLIN-64BIT_.dmg
    (Approx. 56.38 MB)

Back

PDF files can be viewed using free Adobe® Reader® software.
Download Adobe® Reader®.

Return to top