Nikon | Download center | Camera Control Pro 2

Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.

Camera Control Pro 2

Select your operating system.

Windows
Mac OS

This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.

Notices

• This software is for current owners of Camera Control Pro 2. For new users, it functions as a trial version that, once installed, can be used for up to 30 days before purchase is required.
• This software is distributed as a file named “S-CCPRO_-022200WF-ALLIN-32BIT_.exe”. Download and run the file to perform the update.
• When performing the update, you may be required to enter the product key to confirm ownership.
• Before beginning installation, exit Camera Control Pro 2 and all other applications, including any anti-virus software.
• When performing the update, log in to an account with administrator privileges.
• The interface after the update will be in the same language as the current software and can not be changed.
• Read the information below before proceeding.

Product Description

System requirements
Name	Camera Control Pro 2 Version 2.22.0
File name	S-CCPRO_-022200WF-ALLIN-32BIT_.exe
Copyright	Nikon Corporation
Archive type	Self-extracting
Reproduction	Not permitted
Supported cameras	D4S, D4, D3X, D3S, D3 Df, D810, D810A, D800, D800E, D750, D700, D610, D600, D300S, D300 D7200, D7100, D7000, D5500, D5300, D5200, D5100, D5000, D90, D60, Nikon 1 V3 (“C” firmware version 1.10 or later)
Operating system	Microsoft Windows 8.1 Microsoft Windows 8.1 Pro Microsoft Windows 8.1 Enterprise Microsoft Windows 7 Home Basic Microsoft Windows 7 Home Premium Service Pack 1 Microsoft Windows 7 Professional Service Pack 1 Microsoft Windows 7 Enterprise Service Pack 1 Microsoft Windows 7 Ultimate Service Pack 1 Note: Pre-installed versions only. 64- and 32-bit editions supported, but software runs as a 32-bit application under 64-bit editions of Windows.
CPU	Intel Celeron, Pentium 4, or Core series, 1 GHz or better
RAM	1 GB or more (1.5 GB or more recommended)
Hard-disk space	A minimum of 500 MB available on the start-up disk (1 GB or more recommended)
Monitor	Resolution: 1024 × 768 pixels (XGA) or more Colors: 24-bit color (True Color) or more
Interface	Built-in USB port required. May not function as expected if camera is connected via a USB hub.
Notices	• To users of cameras other than the D3, D700, D300S, D300, D5000, D90, and D60: The Explorer, Nikon Transfer 2, and other software will not show the pictures stored on memory cards inserted in the camera. The pictures will be displayed when you exit Camera Control Pro 2. • Using AF-F with D4, D800, D800E, D610, D600, D7100, D7000, D5500, D5300, D5200, D5100, and Df cameras: The focus point will not be recorded in the photo information for pictures taken using the Shoot button while AF-F is selected for autofocus mode. Except in the case of the D5200, the focus point will be recorded with pictures taken using the AF and Shoot button, but note that pictures can not be taken using the AF and Shoot button when AF-F is selected with the D7000.

Changes from Version 2.21.0

• The D810A and Nikon 1 V3 (“C” firmware version 1.10 or later) are now supported. If you are using a Nikon 1 V3 with an earlier version of the “C” firmware, download a firmware update from our website and update the camera firmware.

Installation

Create a folder on the hard disk and name it as desired.
Download S-CCPRO_-022200WF-ALLIN-32BIT_.exe to the folder created in Step 1.
Run S-CCPRO_-022200WF-ALLIN-32BIT_.exe to launch the installer.
Follow the on-screen instructions to complete installation.

Notices

• This software is for current owners of Camera Control Pro 2. For new users, it functions as a trial version that, once installed, can be used for up to 30 days before purchase is required.
• This software is distributed as a file named “S-CCPRO_-022200MF-ALLIN-64BIT_.dmg”. Download and run the file to perform the update.
• When performing the update, you may be required to enter the product key to confirm ownership.
• Before beginning installation, exit Camera Control Pro 2 and all other applications, including any anti-virus software.
• When performing the update, you will be prompted for the administrator password.
• The interface after the update will be in the same language as the current software and can not be changed.
• Read the information below before proceeding.

Product Description

System requirements
Name	Camera Control Pro 2 Version 2.22.0
File name	S-CCPRO_-022200MF-ALLIN-64BIT_.dmg
Copyright	Nikon Corporation
Archive type	Self-extracting
Reproduction	Not permitted
Supported cameras	D4S, D4, D3X, D3S, D3 Df, D810, D810A, D800, D800E, D750, D700, D610, D600, D300S, D300 D7200, D7100, D7000, D5500, D5300, D5200, D5100, D5000, D90, D60, Nikon 1 V3 (“C” firmware version 1.10 or later)
Operating system	OS X 10.10.3 OS X 10.9.5 OS X 10.8.5
CPU	Intel Core or Xeon series, 1 GHz or better
RAM	2 GB or more
Hard-disk space	A minimum of 500 MB available on the start-up disk (1 GB or more recommended)
Monitor	Resolution: 1024 × 768 pixels (XGA) or more Colors: 24-bit color (millions of colors) or more
Interface	Built-in USB port required. May not function as expected if camera is connected via a USB hub.
Notices	• To users of cameras other than the D3, D700, D300S, D300, D5000, D90, and D60: Image Capture, iPhoto, Nikon Transfer 2, and other software will not show the pictures stored on memory cards inserted in the camera. The pictures will be displayed when you quit Camera Control Pro 2. • Using AF-F with D4, D800, D800E, D610, D600, D7100, D7000, D5500, D5300, D5200, D5100, and Df cameras: The focus point will not be recorded in the photo information for pictures taken using the Shoot button while AF-F is selected for autofocus mode. Except in the case of the D5200, the focus point will be recorded with pictures taken using the AF and Shoot button, but note that pictures can not be taken using the AF and Shoot button when AF-F is selected with the D7000. • If Camera Control Pro 2 is launched immediately after you have connected a camera containing a memory card with a large number of images (a few hundred or more), the computer may fail to detect the camera or the camera may be slow to respond. Do not launch Camera Control Pro 2 while the memory card access lamp is lit.

Changes from Version 2.21.0

• The D810A and Nikon 1 V3 (“C” firmware version 1.10 or later) are now supported. If you are using a Nikon 1 V3 with an earlier version of the “C” firmware, download a firmware update from our website and update the camera firmware.

Installation

Download S-CCPRO_-022200MF-ALLIN-64BIT_.dmg.
Double-click the downloaded file to mount a “Camera Control Pro 2” disk image containing a “Welcome” file.
Double-click the “Welcome” file to launch the installer.
Follow the on-screen instructions to complete installation.

User's Manual: Download (2.47 MB) (PDF)

Agreement

Download

Download
S-CCPRO_-022200WF-ALLIN-32BIT_.exe
(Approx. 71.86 MB)

Download
S-CCPRO_-022200WF-ALLIN-32BIT_.exe
(Approx. 71.86 MB)

Download
S-CCPRO_-022200WF-ALLIN-32BIT_.exe
(Approx. 71.86 MB)

Download
S-CCPRO_-022200WF-ALLIN-32BIT_.exe
(Approx. 71.86 MB)

Download
S-CCPRO_-022200WF-ALLIN-32BIT_.exe
(Approx. 71.86 MB)

Download

Download
S-CCPRO_-022200MF-ALLIN-64BIT_.dmg
(Approx. 63.80 MB)

Download
S-CCPRO_-022200MF-ALLIN-64BIT_.dmg
(Approx. 63.80 MB)

Download
S-CCPRO_-022200MF-ALLIN-64BIT_.dmg
(Approx. 63.80 MB)

Download
S-CCPRO_-022200MF-ALLIN-64BIT_.dmg
(Approx. 63.80 MB)

Download
S-CCPRO_-022200MF-ALLIN-64BIT_.dmg
(Approx. 63.80 MB)

Back

PDF files can be viewed using free Adobe® Reader® software.
Download Adobe® Reader®.