Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.
COOLPIX S9900 Firmware
Select your operating system.
This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.
-
- • This service supplies software that can be used to update the firmware for COOLPIX S9900 cameras to version 1.2. Before proceeding, select Firmware version in the camera Set up menu and check the camera firmware version. You will not need to download or install this update if the firmware listed above is already installed.
- • This update includes all changes made in previous updates.
- • Read the information below before proceeding.
Note: This package includes two updates: one for the camera itself and the other for the GPS module. The second update will begin when you turn the camera on again after completing the first update.
|
- Changes from Firmware Version 1.1 to 1.2
-
- • Fixed the following issues:
- - In certain locations, location data could sometimes be inaccurate, unavailable, or unreliable.
- - The shutter-speed display would not flash in shutter-priority auto mode if optimal exposure could not be achieved because the subject was too bright.
|
- Changes from Previous Versions
-
Changes from Firmware Version 1.0 to 1.1
- • Fixed an issue that resulted in Points of Interest (POI) for Hong Kong, Macao, and Taiwan not displaying correctly.
|
- Viewing the Camera Firmware Version
-
- Turn the camera on.
- Press the camera MENU button to display the menus.
- Press the multi selector left to display menu icons, then highlight Set up and press OK.
- Highlight Firmware version in the Set up menu and press OK to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.
- Product Description
-
| Name |
COOLPIX S9900 Firmware Version 1.2 |
| Supported cameras |
COOLPIX S9900 |
| Supported firmware versions |
Version 1.0–1.1 |
| File name |
F-S9900-V12W.exe |
| Operating system |
- Microsoft Windows 10 Home
- Microsoft Windows 10 Pro
- Microsoft Windows 10 Enterprise
- Microsoft Windows 8.1
- Microsoft Windows 8.1 Pro
- Microsoft Windows 8.1 Enterprise
- Microsoft Windows 7 Home Basic
- Microsoft Windows 7 Home Premium
- Microsoft Windows 7 Professional
- Microsoft Windows 7 Enterprise
- Microsoft Windows 7 Ultimate
Note: Card reader or computer with built-in memory-card slot required. |
| Copyright |
Nikon Corporation |
| Archive type |
Self-extracting |
| Reproduction |
Not permitted |
- Updating the Camera Firmware
-
- Create a folder on the computer hard disk and name it as desired.
- Download F-S9900-V12W.exe to the folder created in Step 1.
- Run F-S9900-V12W.exe to extract the firmware to a sub-folder in the new folder. The resulting file and folder hierarchy is shown below:
S9900Update
- firmware (the sub-folder containing the firmware)
- firmware.bin (the camera firmware, located in the “firmware” folder)
- gpsfirm.bin (the firmware for the GPS module, located in the “firmware” folder)
- Using a card slot or card reader, copy the “firmware” folder to a memory card that has been formatted in the camera.
Note: Be sure to copy the “firmware” folder to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
- After confirming that the memory card write-protect (“lock”) switch is in the “write” (unlocked) position, insert the memory card into the camera and turn the camera on.
- Select Firmware version in the Set up menu and follow the on-screen instructions to complete the firmware update.
- When a message is displayed stating that the update is complete, turn the camera off and then on again. The firmware update for the GPS module will then begin automatically (if the camera starts normally, the GPS module update is already complete).
- When a message is displayed stating that the second update is complete, turn the camera off and remove the memory card. Note that the second update will take longer than the first.
- Confirm that the firmware had been updated to the new version. If the current firmware is not version 1.2, repeat the update from Step 1.
|
Note: We recommend that you back up images stored in the camera’s internal memory before updating the firmware. See the camera manual for information on copying images from internal memory to a memory card.
Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
CPX_GPS_FirmUp_Win_En.pdf (PDF) (0.26 MB)
Note: Updates can be performed for you by a Nikon-authorized service representative.
|
- Product Description
-
| Name |
COOLPIX S9900 Firmware Version 1.2 |
| Supported cameras |
COOLPIX S9900 |
| Supported firmware versions |
Version 1.0–1.1 |
| File name |
F-S9900-V12M.dmg |
| Operating system |
- macOS High Sierra version 10.13
- macOS Sierra version 10.12
- OS X 10.11.6
- OS X 10.10.5
- OS X 10.9.5
- OS X 10.8.5
- OS X 10.7.5
- Mac OS X 10.6.8
Note: Card reader or computer with built-in memory-card slot required. |
| Copyright |
Nikon Corporation |
| Archive type |
Self-extracting |
| Reproduction |
Not permitted |
- Updating the Camera Firmware
-
- Download F-S9900-V12M.dmg.
- Double-click the F-S9900-V12M.dmg icon to mount a disk image containing the folder and file below:
S9900Update
- firmware (the sub-folder containing the firmware)
- firmware.bin (the camera firmware, located in the “firmware” folder)
- gpsfirm.bin (the firmware for the GPS module, located in the “firmware” folder)
- Using a card slot or card reader, copy the “firmware” folder to a memory card that has been formatted in the camera.
Note: Be sure to copy the “firmware” folder to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
- After confirming that the memory card write-protect (“lock”) switch is in the “write” (unlocked) position, insert the memory card into the camera and turn the camera on.
- Select Firmware version in the Set up menu and follow the on-screen instructions to complete the firmware update.
- When a message is displayed stating that the update is complete, turn the camera off and then on again. The firmware update for the GPS module will then begin automatically (if the camera starts normally, the GPS module update is already complete).
- When a message is displayed stating that the second update is complete, turn the camera off and remove the memory card. Note that the second update will take longer than the first.
- Confirm that the firmware had been updated to the new version. If the current firmware is not version 1.2, repeat the update from Step 1.
|
Note: We recommend that you back up images stored in the camera’s internal memory before updating the firmware. See the camera manual for information on copying images from internal memory to a memory card.
Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
CPX_GPS_FirmUp_Mac_En.pdf (PDF) (0.23 MB)
Note: Updates can be performed for you by a Nikon-authorized service representative.
|
End User License Agreement
