Nikon
English

D610 Firmware

Select your operating system.

  • Windows
  • Mac OS

This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.

  • • This service supplies software that can be used to update the D610 camera “C” firmware to version 1.02. Before proceeding, select Firmware version in the camera SETUP MENU and check the camera firmware version. You will not need to download or install this update if the firmware listed above is already installed.
  • • Read the information below before proceeding.
Changes from “C” Firmware Version 1.01 to 1.02
  • • Added support for the following features of AF-P lenses:
    • - If the standby timer expires after the camera has focused, the focus position will not change when the timer is reactivated.
    • - In manual focus mode, the focus indicator in the viewfinder (or in live view, the focus point selected in the monitor) will flash to show that infinity or the minimum focus distance has been reached by rotating the focus ring.
  • • Added support for AF-P DX lenses.
  • • Fixed the following issues:
    • - Optimal exposure would sometimes not be achieved in photos taken in live view using a lens with electromagnetically controlled aperture (type E lenses).
    • - When used to take pictures after an option was selected for Custom Setting d10 (Exposure delay mode) in the CUSTOM SETTING MENU, Camera Control Pro 2 would sometimes display the error “The camera was not able to take a picture.” despite having actually taken the picture.
Changes from Previous Versions
Changes from “C” Firmware Version 1.00 to 1.01
  • • Added support for auto distortion control data version L:2.000. Update the camera firmware before updating the auto distortion control data to version L:2.000 or later.
Viewing the Camera Firmware Version
  1. Turn the camera on.
  2. Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.
  3. Check the camera firmware version.
  4. Turn the camera off.
Product Description
Name D610 “C” Firmware Version 1.02
Supported cameras D610
Supported camera firmware versions “C” firmware versions 1.00–1.01
File name F-D610-V102W.exe
System requirements
  • Microsoft Windows 10 Home
  • Microsoft Windows 10 Pro
  • Microsoft Windows 10 Enterprise
  • Microsoft Windows 8.1
  • Microsoft Windows 8.1 Pro
  • Microsoft Windows 8.1 Enterprise
  • Microsoft Windows 7 Home Basic
  • Microsoft Windows 7 Home Premium
  • Microsoft Windows 7 Professional
  • Microsoft Windows 7 Enterprise
  • Microsoft Windows 7 Ultimate
Note: Card reader or computer with built-in memory-card slot required.
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Updating the Camera Firmware
  1. Create a folder on the computer hard disk and name it as desired.
  2. Download F-D610-V102W.exe to the folder created in Step 1.
  3. Run F-D610-V102W.exe to extract the following file to a folder named “D610Update”:
    • D610_0102.bin (the camera firmware)
  4. Using a card slot or card reader, copy “D610_0102.bin” to a memory card that has been formatted in the camera.
  5. Insert the memory card into the Slot 1 on the camera and turn the camera on.
  6. Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
  7. Once the update is complete, turn the camera off and remove the memory card.
  8. Confirm that the firmware has been updated to the new version.

Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
DSLR_Firmup_Win_En.pdf (PDF) (0.21 MB)

Note: Updates can be performed for you by a Nikon-authorized service representative.

Product Description
Name D610 “C” Firmware Version 1.02
Supported cameras D610
Supported camera firmware versions “C” firmware versions 1.00–1.01
File name F-D601-V102M.dmg
System requirements
  • macOS Sierra version 10.12
  • OS X 10.11.6
  • OS X 10.10.5
  • OS X 10.9.5
  • OS X 10.8.5
  • OS X 10.7.5
  • Mac OS X 10.6.8
Note: Card reader or computer with built-in memory-card slot required.
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Updating the Camera Firmware
  1. Download F-D610-V102M.dmg.
  2. Double-click the F-D610-V102M.dmg icon to mount a disk image containing a folder named “D610Update”, which in turn contains the following file:
    • D610_0102.bin (the camera firmware)
  3. Using a card slot or card reader, copy “D610_0102.bin” to a memory card that has been formatted in the camera.
  4. Insert the memory card into the Slot 1 on the camera and turn the camera on.
  5. Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
  6. Once the update is complete, turn the camera off and remove the memory card.
  7. Confirm that the firmware has been updated to the new version.

Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
DSLR_Firmup_Mac_En.pdf (PDF) (0.17 MB)

Note: Updates can be performed for you by a Nikon-authorized service representative.

End User License Agreement

  • Download

    F-D610-V102M.dmg
    (Approx. 11.90 MB)

  • Download

    F-D610-V102W.exe
    (Approx. 10.11 MB)

This download service is not available on your device.

You can send yourself an e-mail with a link to this download for use on another device.

PDF files can be viewed using free Adobe® Reader® software.
Download Adobe® Reader®.

Download Center