Nikon
English

COOLPIX B700 Firmware

Select your operating system.

  • Windows
  • Mac OS

This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.

  • • This service supplies software that can be used to update the firmware for COOLPIX B700 cameras to version 1.1. Before proceeding, select Firmware version in the camera Set up menu and check the camera firmware version. You will not need to download or install this update if the firmware listed above is already installed.
  • • Read the information below before proceeding.
Changes from Firmware Version 1.0 to 1.1
  • • Improved the reliability of photo and movie transfer using the SnapBridge app.
  • • Fixed an issue that sometimes resulted in location data added using the SnapBridge app not displaying correctly.
  • • Fixed an issue that would in rare circumstances cause photographs to be recorded in black-and-white.
Viewing the Camera Firmware Version
  1. Turn the camera on.
  2. Press the camera MENU button to display the menus.
  3. Press the multi selector left to display menu icons, then highlight Set up and press OK.
  4. Highlight Firmware version in the Set up menu and press OK to display the camera firmware version.
  5. Check the camera firmware version.
  6. Turn the camera off.
Product Description
Name COOLPIX B700 Firmware Version 1.1
Supported cameras COOLPIX B700
Supported firmware versions Version 1.0
File name F-B700-V11W.exe
Operating system
  • Microsoft Windows 10 Home
  • Microsoft Windows 10 Pro
  • Microsoft Windows 10 Enterprise
  • Microsoft Windows 8.1
  • Microsoft Windows 8.1 Pro
  • Microsoft Windows 8.1 Enterprise
  • Microsoft Windows 7 Home Basic
  • Microsoft Windows 7 Home Premium
  • Microsoft Windows 7 Professional
  • Microsoft Windows 7 Enterprise
  • Microsoft Windows 7 Ultimate
  • Microsoft Windows Vista Home Basic
  • Microsoft Windows Vista Home Premium
  • Microsoft Windows Vista Business
  • Microsoft Windows Vista Enterprise
  • Microsoft Windows Vista Ultimate
Note: Card reader or computer with built-in memory-card slot required.
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Updating the Camera Firmware
  1. Create a folder on the computer hard disk and name it as desired.
  2. Download F-B700-V11W.exe to the folder created in Step 1.
  3. Run F-B700-V11W.exe to extract the firmware to a sub-folder in the new folder. The resulting file and folder hierarchy is shown below:
    • firmware (the sub-folder containing the firmware)
    • firmware.bin (the camera firmware, located in the “firmware” folder)
  4. Using a card slot or card reader, copy the “firmware” folder to a memory card that has been formatted in the camera.
  5. Insert the memory card into the camera and turn the camera on.
  6. Select Firmware version in the Set up menu and follow the on-screen instructions to complete the firmware update.
  7. Once the update is complete, turn the camera off and remove the memory card.
  8. Confirm that the firmware has been updated to the new version.

Note: We recommend that you back up images stored in the camera’s internal memory before updating the firmware. See the camera manual for information on copying images from internal memory to a memory card.

Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
CPX_MS_FirmUp_Win_En.pdf (PDF) (0.17 MB)

Note: Updates can be performed for you by a Nikon-authorized service representative.

Updating COOLPIX Camera Firmware in 5 Simple Steps

Product Description
Name COOLPIX B700 Firmware Version 1.1
Supported cameras COOLPIX B700
Supported firmware versions Version 1.0
File name F-B700-V11M.dmg
Operating system
  • macOS Sierra version 10.12
  • OS X 10.11.6
  • OS X 10.10.5
  • OS X 10.9.5
  • OS X 10.8.5
  • OS X 10.7.5
  • Mac OS X 10.6.8
Note: Card reader or computer with built-in memory-card slot required.
Copyright Nikon Corporation
Archive type Self-extracting
Reproduction Not permitted
Updating the Camera Firmware
  1. Download F-B700-V11M.dmg.
  2. Double-click the F-B700-V11M.dmg icon to mount a disk image containing the folder and file below:
    • firmware (the sub-folder containing the firmware)
    • firmware.bin (the camera firmware, located in the “firmware” folder)
  3. Using a card slot or card reader, copy the “firmware” folder to a memory card that has been formatted in the camera.
  4. Insert the memory card into the camera and turn the camera on.
  5. Select Firmware version in the Set up menu and follow the on-screen instructions to complete the firmware update.
  6. Once the update is complete, turn the camera off and remove the memory card.
  7. Confirm that the firmware has been updated to the new version.

Note: We recommend that you back up images stored in the camera’s internal memory before updating the firmware. See the camera manual for information on copying images from internal memory to a memory card.

Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
CPX_MS_FirmUp_Mac_En.pdf (PDF) (0.14 MB)

Note: Updates can be performed for you by a Nikon-authorized service representative.

Updating COOLPIX Camera Firmware in 5 Simple Steps

End User License Agreement

  • Download

    F-B700-V11M.dmg
    (Approx. 12.95 MB)

  • Download

    F-B700-V11W.exe
    (Approx. 11.44 MB)

This download service is not available on your device.

You can send yourself an e-mail with a link to this download for use on another device.

PDF files can be viewed using free Adobe® Reader® software.
Download Adobe® Reader®.

Download Center