Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.
D5200 Firmware
Select your operating system.
This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.
-
- • This service supplies software that can be used to update the D5200 camera “C” firmware to version 1.03. Before proceeding, select Firmware version in the camera setup menu and check the camera firmware version. You will not need to download or install this update if the firmware listed above is already installed.
- • Read the information below before proceeding.
|
- Changes from “C” Firmware Version 1.02 to 1.03
-
- • Reduced noise (horizontal lines) in movies shot with 1280×720; 60p or 1280×720; 50p selected for Frame size/frame rate.
- • Fixed an issue with the camera freezing when the Clean image sensor option was used.
|
- Changes from Previous Versions
- Changes from “C” Firmware Version 1.01 to 1.02
- • An error message was added for retractable lenses such as the AF-S DX NIKKOR 18–55mm f/3.5–5.6G VR II. The message is displayed and the shutter release disabled when the lens is retracted.
- • The Slower and Faster labels in the Hindi version of the ISO sensitivity settings > Minimum shutter speed > Auto display were reversed; the display has been changed to fix this issue.
- • We have changed how photo Exif data displays the focal length in 35 mm format equivalent.
- • The following issues have been fixed:
- - The camera would freeze when items were added to MY MENU (Add items).
- - When AF-ON was assigned to the AE-L/AF-L button, the camera would under some conditions fail to focus when the button was pressed.
- - Noise in the form of lines would sometimes appear in the bottom right corner of photos taken using HDR (high dynamic range).
|
Changes from “C” Firmware Version 1.00 to 1.01
- • The camera now correctly shows the battery level for EN-EL14a rechargeable Li-ion batteries. In “C” firmware version 1.00, endurance (measured in the number of photos that could be taken on a full charge) for the EN-EL14a was less than that for the EN-EL14. Version 1.01 now exploits the full potential of the EN-EL14a so that its endurance is now greater than the EN-EL14. As of version 1.01, the approximate numbers of photographs and length of movie footage that can be taken with a fully-charged EN-EL14a (7.2 V DC, 1230 mAh) are as follows:
Photographs, single-frame release mode (CIPA standard *): 540
Photographs, continuous release mode (Nikon standard *): 2050
Movies (CIPA standard *): 45 minutes
* See the D5200 manual.
|
- Viewing the Camera Firmware Version
-
- Turn the camera on.
- Press the camera MENU button and select Firmware version in the setup menu to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.
- Product Description
-
| Name |
D5200 “C” Firmware Version 1.03 |
| Supported cameras |
D5200 |
| Supported camera firmware versions |
“C” firmware versions 1.00–1.02 |
| File name |
F-D5200-V103W.exe |
| System requirements |
- Microsoft Windows 10 Home
- Microsoft Windows 10 Pro
- Microsoft Windows 10 Enterprise
- Microsoft Windows 8.1
- Microsoft Windows 8.1 Pro
- Microsoft Windows 8.1 Enterprise
- Microsoft Windows 7 Home Basic
- Microsoft Windows 7 Home Premium
- Microsoft Windows 7 Professional
- Microsoft Windows 7 Enterprise
- Microsoft Windows 7 Ultimate
- Microsoft Windows Vista Home Basic
- Microsoft Windows Vista Home Premium
- Microsoft Windows Vista Business
- Microsoft Windows Vista Enterprise
- Microsoft Windows Vista Ultimate
Note: Card reader or computer with built-in memory-card slot required. |
| Copyright |
Nikon Corporation |
| Archive type |
Self-extracting |
| Reproduction |
Not permitted |
- Updating the Camera Firmware
-
- Create a folder on the computer hard disk and name it as desired.
- Download F-D5200-V103W.exe to the folder created in Step 1.
- Run F-D5200-V103W.exe to extract the following file to a folder named “D5200Update”:
• D5200_0103.bin (the camera firmware)
- Using a card slot or card reader, copy “D5200_0103.bin” to a memory card that has been formatted in the camera.
- Insert the memory card into the camera and turn the camera on.
- Select Firmware version in the setup menu and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.
|
Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
DSLR_Firmup_Win_En.pdf (PDF) (0.58 MB)
Note: Updates can be performed for you by a Nikon-authorized service representative.
|
- Product Description
-
| Name |
D5200 “C” Firmware Version 1.03 |
| Supported cameras |
D5200 |
| Supported camera firmware versions |
“C” firmware versions 1.00–1.02 |
| File name |
F-D5200-V103M.dmg |
| System requirements |
- OS X 10.10.5
- OS X 10.9.5
- OS X 10.8.5
- OS X 10.7.5
- Mac OS X 10.6.8
Note: Card reader or computer with built-in memory-card slot required. |
| Copyright |
Nikon Corporation |
| Archive type |
Self-extracting |
| Reproduction |
Not permitted |
- Updating the Camera Firmware
-
- Download F-D5200-V103M.dmg.
- Double-click the F-D5200-V103M.dmg icon to mount a disk image containing a folder named “D5200Update”, which in turn contains the following file:
• D5200_0103.bin (the camera firmware)
- Using a card slot or card reader, copy “D5200_0103.bin” to a memory card that has been formatted in the camera.
- Insert the memory card into the camera and turn the camera on.
- Select Firmware version in the setup menu and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.
|
Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
DSLR_Firmup_Mac_En.pdf (PDF) (0.55 MB)
Note: Updates can be performed for you by a Nikon-authorized service representative.
|
End User License Agreement
