Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.
COOLPIX S6700 Firmware
Select your operating system.
This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.
-
- • This service supplies software that can be used to update the firmware for COOLPIX S6700 cameras to version 1.1. Before proceeding, select Firmware version in the camera setup menu and check the camera firmware version. You will not need to download or install this update if the firmware listed above is already installed.
- • Read the information below before proceeding.
|
- Changes from Firmware Version 1.0 to 1.1
-
- • Fixed an issue that in rare circumstances caused the camera to freeze with the lens extended when the power was turned on.
|
- Viewing the Camera Firmware Version
-
- Turn the camera on.
- Press the camera MENU button to display the menus.
- Press the multi selector left to display menu icons, then highlight SETUP and press OK.
- Highlight Firmware version in the setup menu and press OK to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.
- Product Description
-
| Name |
COOLPIX S6700 Firmware Version 1.1 |
| Supported cameras |
COOLPIX S6700 |
| Supported firmware versions |
Version 1.0 |
| File name |
F-S6700-V11W.exe |
| Operating system |
- Microsoft Windows 8.1
- Microsoft Windows 8.1 Pro
- Microsoft Windows 8.1 Enterprise
- Microsoft Windows 7 Home Basic
- Microsoft Windows 7 Home Premium
- Microsoft Windows 7 Professional
- Microsoft Windows 7 Enterprise
- Microsoft Windows 7 Ultimate
- Microsoft Windows Vista Home Basic
- Microsoft Windows Vista Home Premium
- Microsoft Windows Vista Business
- Microsoft Windows Vista Enterprise
- Microsoft Windows Vista Ultimate
Note: Card reader or computer with built-in memory-card slot required. |
| Copyright |
Nikon Corporation |
| Archive type |
Self-extracting |
| Reproduction |
Not permitted |
- Updating the Camera Firmware
-
- Create a folder on the computer hard disk and name it as desired.
- Download F-S6700-V11W.exe to the folder created in Step 1.
- Run F-S6700-V11W.exe to extract the firmware to a sub-folder in the new folder. The resulting file and folder hierarchy is shown below:
• firmware (the sub-folder containing the firmware)
• firmware.bin (the camera firmware, located in the “firmware” folder)
- Using a card slot or card reader, copy the “firmware” folder to a memory card that has been formatted in the camera.
- Insert the memory card into the camera and turn the camera on.
- Select Firmware version in the setup menu and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.
|
Note: We recommend that you back up the pictures in the camera’s built-in memory before performing the update. For information on copying pictures from built-in memory to a memory card, see the documentation provided with the camera. For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
CPX_MS_FirmUp_Win_En.pdf (PDF) (0.60 MB)
Note: Updates can be performed for you by a Nikon-authorized service representative.
|
- Product Description
-
| Name |
COOLPIX S6700 Firmware Version 1.1 |
| Supported cameras |
COOLPIX S6700 |
| Supported firmware versions |
Version 1.0 |
| File name |
F-S6700-V11M.dmg |
| Operating system |
- OS X 10.10.4
- OS X 10.9.5
- OS X 10.8.5
- OS X 10.7.5
- Mac OS X 10.6.8
Note: Card reader or computer with built-in memory-card slot required. |
| Copyright |
Nikon Corporation |
| Archive type |
Self-extracting |
| Reproduction |
Not permitted |
- Updating the Camera Firmware
-
- Download F-S6700-V11M.dmg.
- Double-click the F-S6700-V11M.dmg icon to mount a disk image containing the folder and file below:
• firmware (the sub-folder containing the firmware)
• firmware.bin (the camera firmware, located in the “firmware” folder)
- Using a card slot or card reader, copy the “firmware” folder to a memory card that has been formatted in the camera.
- Insert the memory card into the camera and turn the camera on.
- Select Firmware version in the setup menu and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.
|
Note: We recommend that you back up the pictures in the camera’s built-in memory before performing the update. For information on copying pictures from built-in memory to a memory card, see the documentation provided with the camera. For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
CPX_MS_FirmUp_Mac_En.pdf (PDF) (0.57 MB)
Note: Updates can be performed for you by a Nikon-authorized service representative.
|
End User License Agreement
