Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.
D3200 Firmware
Select your operating system.
This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.
-
- • This service supplies software that can be used to update the D3200 camera “C” firmware to version 1.04. Before proceeding, select Firmware version in the camera setup menu and check the camera firmware version. You will not need to download or install this update if the firmware listed above is already installed.
- • Read the information below before proceeding.
|
- Changes from “C” Version Firmware 1.03
-
- • Addressed an issue that caused the memory card access lamp to light longer than normal or the message “This memory card cannot be used. Card may be damaged. Insert another card” to be displayed while the memory card was accessed.
|
- Viewing the Camera Firmware Version
-
- Turn the camera on.
- Press the camera MENU button and select Firmware version in the setup menu to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.
- Product Description
-
| Name |
D3200 “C” Firmware Version 1.04 |
| Supported cameras |
D3200 |
| Supported camera firmware versions |
“C” firmware versions 1.00–1.03 |
| File name |
F-D3200-V104W.exe |
| System requirements |
- Microsoft Windows 8.1
- Microsoft Windows 8.1 Pro
- Microsoft Windows 8.1 Enterprise
- Microsoft Windows 7 Home Basic
- Microsoft Windows 7 Home Premium
- Microsoft Windows 7 Professional
- Microsoft Windows 7 Enterprise
- Microsoft Windows 7 Ultimate
- Microsoft Windows Vista Home Basic
- Microsoft Windows Vista Home Premium
- Microsoft Windows Vista Business
- Microsoft Windows Vista Enterprise
- Microsoft Windows Vista Ultimate
Note: Card reader or computer with built-in memory-card slot required. |
| Copyright |
Nikon Corporation |
| Archive type |
Self-extracting |
| Reproduction |
Not permitted |
- Updating the Camera Firmware
-
- Create a folder on the computer hard disk and name it as desired.
- Download F-D3200-V104W.exe to the folder created in Step 1.
- Run F-D3200-V104W.exe to extract the following file to a folder named “D3200Update”:
• D3200_0104.bin (the camera firmware)
- Using a card slot or card reader, copy “D3200_0104.bin” to a memory card that has been formatted in the camera.
- Insert the memory card into the camera and turn the camera on.
- Select Firmware version in the setup menu and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.
|
Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
DSLR_Firmup_Win_En.pdf (PDF) (0.58 MB)
Note: Updates can be performed for you by a Nikon-authorized service representative.
|
- Product Description
-
| Name |
D3200 “C” Firmware Version 1.04 |
| Supported cameras |
D3200 |
| Supported camera firmware versions |
“C” firmware versions 1.00–1.03 |
| File name |
F-D3200-V104M.dmg |
| System requirements |
- OS X 10.10.3
- OS X 10.9.5
- OS X 10.8.5
- OS X 10.7.5
- Mac OS X 10.6.8
Note: Card reader or computer with built-in memory-card slot required. |
| Copyright |
Nikon Corporation |
| Archive type |
Self-extracting |
| Reproduction |
Not permitted |
- Updating the Camera Firmware
-
- Download F-D3200-V104M.dmg.
- Double-click the F-D3200-V104M.dmg icon to mount a disk image containing a folder named “D3200Update”, which in turn contains the following file:
• D3200_0104.bin (the camera firmware)
- Using a card slot or card reader, copy “D3200_0104.bin” to a memory card that has been formatted in the camera.
- Insert the memory card into the camera and turn the camera on.
- Select Firmware version in the setup menu and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.
|
Note: For more detailed instructions or information on the equipment needed to complete the update, download the following pdf file:
DSLR_Firmup_Mac_En.pdf (PDF) (0.55 MB)
Note: Updates can be performed for you by a Nikon-authorized service representative.
|
End User License Agreement
